Axis 570 User Manual page 65

SNA
Section 3: Setting Up - SNA
64
Description: This is the Host Ethernet/Token Ring MAC address.
It is normally set to the MAC address of the host. When the Print
Server is connected to the host through a gateway, this parameter
should be set to the MAC address of the gateway. For a directly
attached AS/400 system, this value is found in the "Line
Description".
• Host Network Name
Name:
H1_NW_NAME
Environment: AS/400 only. 5494 emulation.
Description: This is the AS/400 Host System Network Name. This
host parameter may be viewed by issuing the DSPNETA command
on the AS/400 system. It is presented as the "Local network ID"
(LCLNETID).
• Host LU Name
Name:
H1_LU_NAME
Environment: AS/400 only
Description: This parameter defines the LU name of the AS/400
system that should match the Local location name (LCLLOC-
NAME), defined in the AS/400 system. Issue the DSPNETA com-
mand to view LCLLOCNAME.
If a remote workstation for this Print Server is already defined on
the AS/400 system, issue the DSPCTLD command to ensure that
this parameter matches LCLLOCNAME. If the Local location name
is set to *NETATR, you should use the DSPNETA command to
view LCLLOCNAME.
The Host LU Name may comprise the letters A-Z and/or numerals
0-9, but must begin with a letter. The letters used should all be in
and a maximum of 8 characters are allowed.
UPPERCASE
• Automatic Link Establishment
Name:
AUTODIAL
Environment: Mainframe and AS/400
Description: This parameter controls whether the print server will
automatically try to establish the link when the print server is
switched on, or if communication is lost.
, Default:
APPN
, Default:
none
, Default:
no
AXIS 570/670 MIO User's Manual