Windows
Section 5: Setting Up - Windows
Client-Server Printing:
Client Setup
86
Follow these steps to use your AXIS 570/670 MIO for client-server
printing at a Windows for Workgroups client:
1. In the Control Panel, select Printers.
2. Select a printer driver from the list of Installed Printers (or click
Add>> to install a new driver), then click Connect...
3. Select Network...
4. In the Device Name list, select a local port (LPT1 - LPT3) to
redirect to your network printer.
5. In the Show Shared Printers on list, select the server from Server
Setup above.
6. In the Shared Printers list, select the printer you want to use.
7. Click OK.
8. OK and Close.
9. Exit Control Panel.
The client setup is completed and you can now print through your
AXIS 570/670 MIO.
AXIS 570/670 MIO User's Manual