Axis 570 User Manual page 115

UNIX
Section 8: Setting Up - UNIX
Note:
114
All strings must be entered as hexadecimal byte values, and each
match and substitute string must be preceded by a count byte. Refer to
PR1_STR String Substitutions in Appendix B - The Parameter List, on
page 133.
Example 1:
To replace the UNIX New Line (hex
(hex ) for logical printer PR1, edit the following entry in
0D 0A
your config file:
PR1_STR.
is the match string count byte (length of the match string),
01
is the match string,
0A
is the substitute count byte, and
02
is the substitute string.
0D 0A
Example 2:
To replace the UNIX New Line (hex
(hex ), and the printer command
0D 0A
E
(hex ) for logical printer PR2, edit the following entry
Y 1B 59
C
in your config file:
PR2_STR. : 01 0A 02 0D 0A 03 1B 47 31 02 1B 59
Extensive use of string substitutions will naturally decrease the
throughput rate of the AXIS 570/670 MIO.
) with an ASCII NewLine
0A
: 01 0A 02 0D 0A
) with an ASCII NewLine
0A
E
(hex
G1 1B 47 31
C
AXIS 570/670 MIO User's Manual
) with