Axis 570 User Manual page 114

Adding Strings Before
and After Print Jobs
String Substitutions
AXIS 570/670 MIO User's Manual
These string functions provide a way to send printer control commands
before and after each print job. They may be specified individually for
each logical printer.
All strings are entered as hexadecimal byte values.
Example 1:
Assume that the logical printer PR5 is configured as a PostScript
printer. To append the PostScript End of File character
(Ctrl-D, hex ) after each print job, edit the following entry in
04
your config file:
PR5_AFT.
Example 2:
You have an HP LaserJet printer with dual input bins, and want
to print on pre-printed forms when using the logical printer PR4.
The standard forms are taken form bin 1, and the pre-printed
forms are taken from bin 2. The strings before and after print jobs
should then contain commands to select bin 2 (
E
bin 1 ( ) respectively. Edit the following entries in your
&l1H
C
config file:
PR4_BEF.
PR4_AFT.
The string substitution function performs search and replace
operations on the print data. The primary application is to replace
printer control commands. Up to 20 string substitutions may be
specified individually for each logical printer.
Section 8: Setting Up - UNIX
: 04
: 1B 26 6C 34 48
: 1B 26 6C 31 48
UNIX
E
) and
&l4H
C
113