Axis 570 User Manual page 107

UNIX
Section 8: Setting Up - UNIX
Integration into the
Host Printer Spooler
106
To integrate the AXIS 570/670 MIO into the host printer spooler you
will need to use the auto installation script axinstall, resident in the
AXIS 570/670 MIO. You may install this software onto your host
using FTP. To do this, login to the AXIS 570/670 MIO with this
command:
ftp <host name>
where is the name assigned in your system host table,
host name
e.g. .
npserver
You will be prompted to enter your user id and password. Use the user
id , which has the default password
root
the highest priority). Up-load the script using the command
as shown in the example below. Text that you enter is
get axinstall
in bold.
Log out using the command
FTP version.
> ftp npserver
connected to npserver.
220 AXIS 570/670 MIO FTP Printer Server
ready.
Name (npsserver:thomas): root
331 User name ok, need password
Password: pass
230 User logged in
ftp> get axinstall
220 PORT command successful.
150 Opening data connection for axinstall
(192,36,253,4,13,223) (0 bytes), (mode ascii).
226 Transfer complete.
local: axinstall remote: axinstall
27545 bytes received in 4.1 seconds (6.5 kbytes/s)
ftp> bye
221 Goodbye.
>
Typical FTP session for collecting the axinstall script
(
pass root
or depending on your
quit, bye exit
(not visible)
AXIS 570/670 MIO User's Manual
is the user id with