Axis 570 User Manual page 44

Local major
node definitions
Note:
Verify the
Communication
AXIS 570/670 MIO User's Manual
The example below shows how the print server PU and LU definitions
may be coded in a local major node definition:
* 570/670 MIO DSPU DEFINITION
DSPU670 PU CUADDR=E31,
MODETAB=MODE3290,
PUTYPE=2,ISTATUS=ACTIVE,MAXBFRU=1
DSPULU02 LU LOCADDR=2
SSCPFM=USSSCS,
USSTAB=USSTAB,
PACING=1,
VPACING=2,
ISTATUS=ACTIVE,
LOGAPPL=MWTC,
DLOGMOD=SCS570/670
DSPULU03 LU LOCADDR=3,
SSCPFM=USSSCS,
USSTAB=USSTAB,
PACING=1,
VPACING=2,
ISTATUS=ACTIVE,
LOGAPPL=MWTC,
DLOGMOD=SCS570/670
If the LAN media is ethernet, the MAC-addresses in the 3174 as
well as the AXIS 570/670 MIO have to be reversed bytewise.
Example: 00408C1B06D4 -> 000231D8602B
The easiest way to test the communication is by sending a print job to
the AXIS 570/670 MIO. If there are problems, press the test button
once to print the test page where you can find the present SNA link
status.
The AXIS 570/670 MIO is now ready for use in the SNA
environment. If needed, it can be further adapted to your system using
the AXIS NetPilot™ or by printing special configuration commands
to it. See AXIS 570/670 MIO Set-up on page 61. Please note that you
may have to edit the host configuration you have just made according
to the new AXIS 570/670 MIO settings.
Section 3: Setting Up - SNA
SNA
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
43