Axis 570 User Manual page 123

UNIX
Section 8: Setting Up - UNIX
System Requirements
for SNMP
The AXIS MIB
122
The following requirements must be fulfilled in order to make full use
of the AXIS 570/670 MIO SNMP support:
• An NMS software that allows you to install private enterprise
MIBs.
• A host that supports FTP on which to run the NMS
software.Follow these steps to add the AXIS MIB to your NMS
software:
1. Log in to the AXIS 570/670 MIO using FTP.
2. Up-load the MIB file /snmp/axis.mib to the NMS host.
3. Install the AXIS MIB according to instructions in your NMS
software documentation.
The AXIS MIB contains a large number of objects which may be
categorized as follows:
• Menu objects - used for viewing and changing the
AXIS 570/670 MIO configuration from the NMS program. Refer
to Appendix B - The Parameter List, on page 133.
• Printer status and unit administration objects - used for monitoring
AXIS 570/670 MIO print jobs and storing parameter changes
permanently.
• Trap objects - used for alarms at various error conditions.
For technical details, you can view the MIB file (axis.mib) with any text
editor.
AXIS 570/670 MIO User's Manual