Axis 570 User Manual page 138

AXIS 570/670 MIO User's Manual
To access the front panel setup do as follows:
1. Make sure the printer is turned on and that the
AXIS 570/670 MIO is properly installed.
2. Press the On line key on the printer once to set the printer off line.
Check that the Ready light is off.
3. Press the Menu key repeatedly until the printer display reads
" ".
MIO MENU
4. Press the Item key once. The display shows "
5. Press the + key. The display shows "
6. Press the Enter key. The display shows "
7. Press the Item key until the display shows the name of the
configuration setting you wish to alter.
8. Press the + key.
9. Press the Enter key.
10. Press the Item key until the name and value of the parameter you
wish to edit is displayed.
11. Edit the value by using the + and - keys. If you keep the keys
pressed, the value will change more rapidly.
12. Press the Item key and edit all other parameters you wish to alter
as their names and values are displayed. When all parameters of a
group of settings have been displayed, the Item key will display
the name of the next group of settings. If you wish to change other
settings, repeat from step 7.
13. When you have made all settings, if the display does not show
"
PRT PARLIST=NO*
14. If you want a printout of the AXIS 570/670 MIO parameter list,
press the + key and press Enter.
15. Press the On line key to make the printer ready to accept your
print jobs.
Appendix B: The Parameter List
CFG=YES
", then press the Item key until it does.
".
CFG=NO*
".
".
CFG=YES*
137