Page 1 AXIS 5570e/AXIS 5670e Host-to-LAN Print Servers User’s Manual AXIS 5570e / AXIS 5670e User’s Manual...
Page 2: Regulatory Information
Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice.
Page 3: Table Of Contents
About this Manual ......6 About Axis ........6 Support Services .
Page 4 SuSE 8.0 ........121 AXIS axinstall Script ......122 Print Methods on TCP/IP Networks .
Page 5 Configuring the AS/400 Host, 5494 CU mode ..197 Configuring the Axis Network Print Server ..197 Verifying the Communications Link ....198 Amending Device Features .
Page 6: Introduction
Introduction Section 1 Introduction Thank you for purchasing the AXIS 5570e/AXIS 5670e print server. This product has been developed to connect your printers anywhere in your network, allowing all network users access to the shared printer resources. The AXIS 5570e/AXIS 5670e is a LAN attached multi-protocol print server that prints IBM and ASCII data streams to any ASCII printer.
Page 7: Support Services
• Find answers to previously resolved problems in the FAQ database. Search by product, category or phrase • Report problems to Axis support staff by logging in to your private support area • Visit the Axis support Web at www.axis.com/techsup...
Page 8: Product Overview
Item Warranty Sheet Printed Material Adhesive Holder & Clip* USB Cable only supplied with AXIS 5570e* * Only supplied with AXIS 5570e. Note: The USB cable supports USB Low-Speed and Full-Speed. Hi-Speed is not supported. Model Part Number 0188-001-02 TCP/IP...
Page 9: Protocols And Datastreams
SNA support Digital Copier Support Note: All models may not be available in all countries in which Axis operates. Please contact your local sales representative for more information. AXIS 5570e / AXIS 5670e User’s Manual IPDS SNA (part no. 0193) TCP/IP (part no.
Page 10: Physical Description
AXIS 5570e LPT1 Ethernet Connector Power Connector Mounting the AXIS Using the supplied clip and holder, the AXIS 5570e can be mounted e.g. 5570e on the back of the printer or on a wall. Adhesive Clip Adhesive Holder AXIS 5670e...
Page 11 RJ-45 (Category 5 or 6 twisted pair) cable. Printer Ports AXIS 5570e AXIS 5570e is equipped with one USB port that is USB 1.1 and 2.0 Low- and Full-Speed compliant, and one high-speed IEEE 1284 compatible parallel port. AXIS 5670e AXIS 5670e is equipped with two high-speed IEEE 1284 compatible parallel ports and one RS232 serial port.
Page 12: Axis Network Product Cd
The Axis Network Print Server print server provides high performance and reliability combined with low power consumption. The electronic circuits are based on the AXIS ETRAX 100LX chip, which comprises an integrated 32 bit RISC processor and associated network controllers.
Page 13 “Enabling Secure Web Services — SSL/TLS” on page 164. Monitoring The internal print server Web pages and AXIS ThinWizard (3.04 and up) allow you to continuously monitor printer status. The Web pages are used to monitor single Axis units while AXIS ThinWizard can be used to monitor multiple Axis units.
Page 14: Basic Installation
Management and Configuration, on page 128, for more information. • The AXIS 5570e/AXIS 5670e uses high speed Centronics communication. For use with older printers not supporting high speed, this function can be disabled by using any standard Web browser. Please refer to “Management and Configuration” on page 128, for more information.
Page 15: Installation Guide
Installation Guide After connecting the Axis Network Print Server to your network, you are now ready to perform the basic setup procedures. The method of installation that you choose should be dictated by your printing requirements and the type of network into which you are integrating.
Page 16: Setting The Ip Address
IP address automatically. The IP address will then appear on DHCP the test page printed when you press the test button once. You should now be able to access the print server’s internal Web pages as described on Accessing the Web Pages, on page 129 Server required Comment See “Adding Printers in Windows 2000 / XP / 2003 us-...
Page 17 • Use a Web browser with JavaScript support and Java enabled. • The Axis Network Print Server supports WINS (Windows Internet Name Service), which is recommended when setting the IP address using DHCP in Windows environments. • If you are working in a WINS/ DDNS network, you can access the print server’s Web pages using its default host name: In the Web browser’s Location/Address field, enter the...
Page 18 You must define the Default Router and Subnet Mask when you set a static IP address. Log in to the print server’s Web pages and select Admin | Network Settings | Detailed View | TCP/IP Network | Default Router and Subnet Mask.
Page 19 3. If it is not already running, start the RARP daemon. This is typically performed using the 4. Restart the AXIS 5570e/AXIS 5670e to download the IP address. Notes: • The Ethernet address is equal to the serial number, which can be found on the underside label of the AXIS 5570e/AXIS 5670e.
Page 20 Basic Installation Notes: • The Axis Network Print Server supports WINS (Windows Internet Name Service), which is recommended when setting the IP address using DHCP in Windows environments. • The Ethernet Address is the same as the serial number, found on the print server’s under- side label.
Page 21 IP address from your network administrator. Important: DO NOT use the IP addresses used in the following examples when installing your Axis Network Print Server. Always consult your network administrator before assigning an IP address to your Axis Network Print Server.
Page 22: Setting Up - As/400 (Iseries)
Mode TN5250E (TCP/IP) PPR/PPD (TCP/IP) If you intend to operate your Axis Network Print Server in a multi- protocol environment, you should also proceed to the other relevant sections in this manual. SNA Printing - 5494 Mode The 5494 mode provides a significantly richer set of features for formatting text and is the recommended emulation mode in AS/400 environments.
Page 23 If this is the case, please refer to the Axis Web site for further documentation. Note: You will find an AS/400 Parameter checklist in the AXIS 5570e/AXIS 5670e User’s Guide where you can enter the values described in this section for future reference. 1. Type...
Page 24 Option ..: OPTION Category of line . . : --------------Active Switched Controllers-------- CONTROLER1 CONTROLER2 CONTROLER3 F3=Exit F11= Nondisplay keywords AXIS 5570e / AXIS 5670e User’s Manual S44A6643 ETHLINE *BASIC *ELAN LIN061 *YES *NOWAIT...
Page 25 Display Line Description Press Enter to continue. 7. Type code page for future reference. Press F3 to exit. AXIS 5570e / AXIS 5670e User’s Manual Line description .: LIND Option ..: OPTION Category of line .: SSAP List.
Page 27 Press Enter to continue. F3=Exit Use the command characters of the Axis Network Print Server 5494 LU Name)and press Enter to delete any previously created Controller and Device descriptions specific to your Axis Network Print Server. Delete the Device Descriptions (indented text) first and then the Controllers.
Page 28 1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator. 2. Enter the IP address or the host name of the Axis Network Print Server in the location field and press the Enter key on your keyboard. The internal Web pages of the Axis Network Print Server will appear.
Page 29: Tn5250E Printing (Scs Over Ip)
Enter. This command starts the writer for this printer device. 3. Press the Axis Network Print Server test button once to print a test page. Ensure that the SNA status is defined on the test page as...
Page 30 1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator. 2. Enter the IP address or the host name of the Axis Network Print Server in the location field and press the Enter key on your keyboard. The internal Web pages of the Axis Network Print Server will appear.
Page 31: Ppr/Ppd Printing - Ipds Data Streams
PPR/PPD Printing - IPDS Data Streams Note: IPDS is only available for AXIS 5570e/AXIS 5670e models with the IPDS option installed. For more information, refer to Protocols and Datastreams, on page 9. The configuration procedures presented in this section are divided into three separate steps: •...
Page 32 Port number (PORT) Font Identifier (FONT) Remote location (RMTLOCNAME) User-defined object (USRDFNOBJ): Library at the *PSFCFG User-defined object (USRDFNOBJ): line. AXIS 5570e / AXIS 5670e User’s Manual > AXISPR1 > QGPL *JOBLIBL *DFT > *YES > *NORDYF > *NOMAX *IMMED...
Page 33 Name or address..User-defined options ..USRDFNOPT AXIS 5570e / AXIS 5670e User’s Manual ..TYPE ..PORT .
Page 34 1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator. 2. Enter the IP address or the host name of the AXIS 5570e/AXIS 5670e in the location field and press the Enter key on your keyboard. The internal Web pages of the AXIS 5570e/AXIS 5670e will appear.
Page 35 6. Direct a printout to this printer device. A successful printout verifies the communication link between the AS/400 and the AXIS 5570e/AXIS 5670e. The AXIS 5570e/AXIS 5670e is now ready for printing in the AS/400 environment. AXIS 5570e / AXIS 5670e User’s Manual...
Page 36: Setting Up - Ibm Mainframe (Zseries)
SNA transport protocol. Important: The Axis Network Print Server must be set up to emulate an IBM 3174 (3174 CU mode) in the Mainframe/VTAM environment. Configuring for SNA printing in 3174 CU Mode is described in three separate stages: •...
Page 37 When using a concentrator gateway between the host and your print server, it is not necessary to define separate VTAM Major Node and PU definitions for the Axis Network Print Server. You will instead be working with the gateway VTAM definitions. Since the Axis Network Print Server will appear to the host as one or several LU's attached to the gateway PU, you need only add LU definitions to the gateway major node definition and then proceed to item 3 below.
Page 38 The examples below are based on samples given in VTAM Customization (IBM part no: SC23-0112), with some changes to optimize use for Axis Network Print Server. VTAM for MVS is assumed, although the configuration for VM and VSE is similar.
Page 39 Node Definitions definitions may be coded in a switched major node definition. * PU definition * E07xxxxxx is the node ID set in Axis Network Print Server. PU5570e1 * Path definition * xxxxxxxxxxxx is the 12 last digits of the MAC...
Page 40 In the path definition, PATH DIALNO should be comprised with its first two digits equal to the place holder, the next two set to the SAP and the remaining twelve digits set to the Axis Network Print Server Ethernet or Node address. By default the Ethernet/Node address is identical to the Axis Network Print Server serial number.
Page 41 Case 1: VTAM Major Node definition is a Switched Major Node. The MAC address of the Axis Network Print Server must be bit-order reversed in the PATH entry. An Axis Network Print Server with a MAC/node address of 00408C1B06D4 will be...
Page 42: Tcp/Ip Tn3270E Printing
• Note: Please refer to the Parameter List and FAQ on the Axis Web site, if the status line indicates that the SNA link is not active. The Axis Network Print Server is now ready for use in the SNA environment.
Page 43 1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator. 2. Enter the IP address or the host name of the Axis Network Print Server in the location field and press the Enter key on your keyboard. The internal Web pages of the Axis Network Print Server will appear.
Page 44 Microsoft SNA Server Communication is established in two separate stages, SNA Server-to-Host connection and SNA Server to Axis Network Print Server connection, as described below: SNA Server-to-Host Connection Follow the steps below to set-up a SNA Server-to-Host connection for the Axis Network Print Server: 1.
Page 45 5. Click the IP Address List tab. 6. Specify the IP Address of the client(s) that you want to assign to this LU. This is the IP address of the Axis Network Print Server, i.e. the same as the INT_ADDR parameter in the Print Server.
Page 46 For additional information about configuring other TN3270E servers, refer to the Technical Notes on www.axis.com NetWare for To set-up a TN3270E connection to the Axis Network Print Server you SAA Server have to set up PU and LU definitions. This is done by following the steps below: 1.
Page 47 18. Leave the rest at their default settings. 19. Click the LU Defaults icon. The panel below will appear 20. Set Default LU category to Public. AXIS 5570e / AXIS 5670e User’s Manual Setting Up - IBM Mainframe (zSeries) PU profile name and Logical adapter...
Page 48 Remote Service Access Point: Local Service Access Point: Enable PU profile at startup: NWSAA SEEDB CPNAME 05D 66204 E100B_1 NWSAAPU E100B_1 LLC 802.2 NWSAAPU NWSAAPU 05D 66204 E100B_1 LLC 802.2 BRLTST Public 0521 020066800000 AXIS 5570e / AXIS 5670e User’s Manual...
Page 49 LU in the host is activated. 2. Send a print job from the host. The Axis Network Print Server is now ready for use. If needed, it can be further adapted to your system using the Web-based configuration pages or IBM Printer Emulation.
Page 50: Ppr/Ppd Printing - Ipds Data Streams
IPDS is only available for print server models with the IPDS option installed. Please refer to “Protocols and Datastreams” on page 9. Before you Begin In order to use the Axis Network Print Server to print IPDS data using TCP/IP as the transport protocol, the following software must be installed and configured on your MVS: •...
Page 51 DEFAULTNET 10.10.12.1 BPCLAN Note: If you change any of the values in the TCP/IP profile, you must restart TCP/IP to activate the new settings. AXIS 5570e / AXIS 5670e User’s Manual Setting Up - IBM Mainframe (zSeries) 1000 1500 32768...
Page 52 1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator. 2. Enter the IP address or the host name of the Axis Network Print Server in the location field and press the Enter key on your keyboard. The internal Web pages of the Axis Network Print Server will appear.
Page 53 (Use ATTN to interrupt.) EZA0464I PING: Ping #1 timed out If the ping is not successful, make sure the Axis Network Print Server is configured according to the instructions in Setting the IP Address, on page 16 and in Configuring the Axis Network Print Server, on page 43.
Page 54 FSA is defined by a FSSDEF BUFNO FSS=FSS1,MODE=FSS,PRMODE=(LINE,PAGE,), CLASS=C,UCS=0,SEP=NO,SEPDS=NO,CKPTPAGE=100 START=YES,MARK=NO,TRKCELL=YES initialization statement is optional but recommended. If it is statements that define each printer PRTnnnn AXIS 5570e / AXIS 5670e User’s Manual DEVICE ) for channel-attached printers statement is...
Page 55 Specifies the FSS for this device and must match the FSA name specified in the corresponding FSS statement. This parameter is required. Enables form markings to be placed on the job trailer pages. For the Axis Network Print Server you should set this parameter to NO.
Page 56 Explanation Specifies the data-set processing modes supported for the printer. It lists all the PRMODE values that the printer accepts. If the Axis Network Print Server is connected to a PostScript printer, the correct setting is .. This setting indicates that composed-page PRMODE=(PAGE,LINE,) and line data sets can be printed.
Page 57 In this case, printer performance is significantly reduced if PSF errors continue to occur. The recommended starting value is 100. Identifies the printer device type. For the Axis Network Print Server you should specify the parameter value .
Page 58 Do not specify a host name in place of the dotted-decimal address. The PORTNO keyword specifies the TCP/IP port to use for the print session. This port number must match the port number set up for the Axis Network Print Server in Configuring the Axis Network Print Server, on page 43.
Page 59 //*01* STATUS = VERSION 2, RELEASE 2, LEVEL 0 //*01* FUNCTION = THIS PROCEDURE IS COPIED FROM THE //*01* NOTES = THE FULL NAME OF THE DEFAULT PAGEDEF IS AXIS 5570e / AXIS 5670e User’s Manual Setting Up - IBM Mainframe (zSeries) TCP/IP ATTACHED DEVICES DISTRIBUTION LIBRARY TO SYS1.PROCLIB.
Page 60 /* SYSTEM FONTS - 300 PEL DISP=SHR DSN=SYS1.PSEGLIB, /* SYSTEM PAGE SEGMENTS DISP=SHR DSN=SYS1.OVERLIB, /* SYSTEM MEDIUM OVERLAYS DISP=SHR DSN=SYS1.PDEFLIB, /* SYSTEM PAGEDEFS DISP=SHR DSN=SYS1.FDEFLIB, /* SYSTEM FORMDEFS DISP=SHR AXIS 5570e / AXIS 5670e User’s Manual SEPARATOR PAGEDEF SEPARATOR FORMDEF...
Page 61 Even if a PSF user requests 120-pel resolution for an AFP print job being sent to the printer, PSF requires 240-pel resources from the library. Do not store 120-pel resources in the library. AXIS 5570e / AXIS 5670e User’s Manual Setting Up - IBM Mainframe (zSeries) PRINTDEV CNTL PRINTDEV FONTDD=*.FONT01, /* 240 PEL FONT LIBRARY DD...
Page 62 *CANCEL printer-name The variable printer-name specifies the name of the printer FSA as defined in JES definitions, on page 53. You can now disconnect the Power Adapter from the Axis Network Print Server. AXIS 5570e / AXIS 5670e User’s Manual...
Page 63: Adding Printers In Windows
Each client computer must install the appropriate printer drivers in order to print properly. For Windows 98 and Me, it is only necessary to install AXIS Print Monitor on a server for client/server printing. AXIS 5570e / AXIS 5670e User’s Manual...
Page 64: Adding Printers In Windows 2000 / Xp / 2003 Using Axis Addprinter Wizard
Each client computer must install the appropriate printer drivers in order to print properly. In Windows 98 and Me, AXIS Print Monitor must be installed on all (printing) client computers for Peer-to-Peer printing. SNMP Device Index...
Page 65 Find... If the print server is located outside your local subnet it will not appear in the list. This may be the case if your router blocks SLP traffic. Click Find. Enter the IP address or host name displayed on the print server’s Test page and click OK.
Page 66: Adding Printers In Windows 2000 / Xp / 2003 Using Windows Add Printer Wizard
Faxes | Add a Printer to start the Windows Add Printer Wizard) Windows 2000: 1. Go to Start | Settings | Printers and click the Add Printer icon to start the Add Printer Wizard. Click Next. AXIS 5570e / AXIS 5670e User’s Manual...
Page 67 If you have an old version of Windows, it will not detect the USB port. If so, type “_LPT2” instead of “_USB1” in the example above, e.g. 192.168.3.191_LPT2. For additional information, see “*Tcpmon.ini” on page 71. AXIS 5570e / AXIS 5670e User’s Manual Physical Port Add suffix Type _USB1...
Page 68 Type _USB1 USB port Type _LPT1 LPT1 (parallel port) Physical print server port connected to printer LPT1 (parallel port) LPT2 (parallel port) COM1 (serial port) AXIS 5570e / AXIS 5670e User’s Manual Entry example 192.168.3.191_LPT1 192.168.3.191_LPT2 192.168.3.191_COM1 Entry example 192.168.3.191_USB1 192.168.3.191_LPT1...
Page 69 Adding Printers in Windows 7. Click Next. Click Next and Finish AXIS 5570e / AXIS 5670e User’s Manual...
Page 70 10. Click Next. Supply a name for the printer and choose whether you want to make it your default printer. Click Next. AXIS 5570e / AXIS 5670e User’s Manual...
Page 71 For the USB port to appear as an option in the Windows Device Port list (see Step 5 above ), you must install Axis tcpmon Upgrade Utility, a script that aids Windows in recognizing the USB port. This script upgrades the tcpmon.ini file (in the system32 directory) by adding new Axis print server ports in the Windows Available Ports list.
Page 72: Adding Printers In Windows 2000 / Xp / 2003 Using The Microsoft Lpr Monitor
Add Printer Wizard. Click Next. 2. Select the appropriate radio button: Local Printer. Click Next. 3. Click the Create a new port radio button and select LPR Port from the list. Click Next. AXIS 5570e / AXIS 5670e User’s Manual...
Page 73 5. Click the Configure Port button. 6. Click the LPR radio button and enter the queue name (PR1, PR2...). 7. Click OK to finish. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in Windows USB port Parallel port 1 Parallel port 2...
Page 74: Adding Printers In Windows Nt Using The Microsoft Lpr Monitor
IP address of the print server. Skip to step 7. 3. If the host name or IP address of the print server you wish to use does not appear in the list, click Add Port.
Page 75: Axis Print Monitor Software
Note: AXIS Print Monitor can also be used for DOS printing. Please refer to the AXIS Print Monitor’s Readme file for instructions. The Readme file is located in the same folder where AXIS Print Monitor is installed on your PC.
Page 76: Adding Printers Over Tcp/Ip In Windows Nt Using Axis Print Monitor
3. The Wizard asks you to select My Computer or Network printer server. Select My Computer, click Next. 4. Click Add Port... In the Available Ports dialog, select AXIS Port and click New Port... 5. Select LPR (TCP/IP) as your choice of protocol and click OK.
Page 77: Adding Netbios/Netbeui Printers In Windows 2000 Using Axis Print Monitor
Next. 4. Select NetBIOS/NetBEUI as your choice of network protocol and click OK. 5. Select the AXIS Port you want to add from the list of available ports. The port appears as <name>.<port> (Example: AX100086.LP1). The <port> is taken from the table below. Click OK.
Page 78: Adding Printers Over Netbios/Netbeui In Windows Nt Using Axis Print Monitor
Port... 5. Select NetBIOS/NetBEUI as your choice of network protocol and click OK. 6. Select the AXIS Port you want to add from the list of available ports. The port appears as <name>.<port> (Example: AX100086.LP1). The <port> is taken from the table below. Click OK.
Page 79: Adding Printers In Windows 98 And Me Over Tcp/Ip Using Axis Print Monitor
Adding Printers in Windows 98 and Me over TCP/IP using AXIS Print Monitor 1. Install AXIS Print Monitor on all workstations that will print via the Axis print server. 2. Next, start the Windows Add Printer Wizard: select Settings | Printers from the Start menu and double-click the Add Printer icon.
Page 80 Settings. 2. Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure AXIS Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK. Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print driver provided with the printer.
Page 81: Adding Printers In Windows 98 And Me Over Netbios/Netbeui Using Axis Print Monitor
5. Select the printer driver you want to install and click Next. 6. Select the AXIS Printer Port from the Available Ports list. The port names appears as <name>.<port>. Here, <name> is AX followed by the last six digits of the print server’s serial number (e.g.
Page 82: Adding Printers In Macintosh
Adding Printers in Macintosh Section 7 Adding Printers in Macintosh Having connected the AXIS 5570e/AXIS 5670e to your network, this section now describes how to set up your print server for printing in Mac OS X and earlier Macintosh environments using AppleTalk.
Page 83 Adding Printers in Macintosh 6. Click Add to finish the installation. The print server has now been added to the Printer List. 7. If you wish to configure printer settings, click Printers | Configure Printer. To Change the You can change the print server’s Bonjour service name via the print server’s...
Page 84: Installation In Mac Os X Using Appletalk
1. Start Print Center (from Go | Applications | Utilities | Print Center) 2. Select Printers | Add Printer... 3. From the Printer List dialog, select AppleTalk. 4. Now, the ports of your print server will appear in the list of available printers. The port is shown as <host name>_<port>. Example: AXIS100086_LPT1.
Page 85: Installation On Mac Os 9.1 Or Older, Using Appletalk
On Mac OS 9.1 or older, basic configuration in AppleTalk is performed simply by opening the Chooser window and selecting a printer. You can change the default name of your print server or any of default parameters by editing the print server’s config file. To access the config file from a Macintosh, you can use: •...
Page 86 You simply need to print a document from the Macintosh computer to verify communication to the chosen printer. The basic installation can be considered complete if the print test is satisfactory. The AXIS 5570e/AXIS 5670e is now ready for use.
Page 87 | Detailed View | Macintosh | Binary Protocol for Printer n. By enabling binary transfer you reduce printing time, provided that the print job is sent as binary data to the print server. This is particular true when you are printing large bitmaps.
Page 88 8. Open the Chooser and select the printer port you wish to use for printing documents. 9. Close the Chooser. Note: The _CFG port disappears 60 minutes after the AXIS 5570e/AXIS 5670e has been powered on. If you want it to reappear, you must restart your print server. BINARY_TYPE_1. :BCP INT_ADDR.
Page 89: Adding Printers In Netware
See “NetWare Administration” on page 114. for information on Novell’s administration tools. If you intend to operate your AXIS 5570e/AXIS 5670e in a multi- protocol, mixed environment, you should also proceed to the other relevant sections in this manual.
Page 90 Important: • The NDPS Enabled parameter of the Axis Network Print Server is by default enabled. It must be set to Yes in order for the communication between the print server and the NDPS gateway to be enabled. To change this parameter, log in to the print server’s Web pages and choose: Admin | Network Settings | Detailed View | NetWare=>...
Page 91 9. You will find the print server in the next window with the printer attached on the connected port. Depending on the transport protocol you used when you start the installation, the print server should appear as following: • TCP/IP Network protocol: IP Address and Port, e.g: 192.168.70.243 and LPT1...
Page 92 400c, 401c, and 402c are the socket numbers corresponding to the LPT1, LPT2, USB1 and COM1 physical ports: LPT1 AXIS5FF66A_P1 LPT2 AXIS5FF66A_P2 USB1 AXIS5FF66A_P2 COM1 AXIS5FF66A_P3 LPT1 400c LPT2 401c USB1 401c COM1 402c AXIS 5570e / AXIS 5670e User’s Manual...
Page 93 1. Enter the <IPX External Network Number> in the Network field. 2. Enter the <Print server’s HW address> in the LAN HW address field. 3. Choose a port in the Print Server Port field, e.g. 01d7e1c2:00408c5ff6a6...
Page 94 Follow these steps to create a controlled access printer as an object in the Printers Directory Tree, using the NetWare administrator utility: 1. Log in as Admin. 2. Start the NW Admin utility on any Workstation (SYS:PUBLIC\WIN32\nwadmin32.exe). 3. Browse the context your NDPS Manager resides in. AXIS 5570e / AXIS 5670e User’s Manual...
Page 95 - Public Access Printer Agent. Use an existing Printer Agent representing a Public Access Printer. 7. Select Create a New Printer Agent and click Create to display the Create Printer Agent dialog. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in NetWare...
Page 96 NDPS Manager to which you want to assign it 9. Select AXIS Gateway Configuration in the Gateway Type field. 10. Click OK. 11. In the Select the printer’s type window choose your printer. If you cannot find the printer, select an appropriate Generic one (PCL, PS, etc) 12.
Page 97 If the printer is not in the displayed print list: 1. Click Manually specify the print server enter the print server’s IP address in the IP Address Field. 2. Choose a port in the Print Server Port field e.g., 192.168.70.243 and LPT1: Ports available AXIS 5570e AXIS 5670e Note: other/unknown stands for the USB1 port.
Page 98 If the printer is not in the displayed print list: 1. Click Manually specify the print server and enter the <IPX External Network Number> in the Network field. 2. Enter the <Print server’s HW address> in the LAN HW address field. LPT1 AXIS5FF66A_P1...
Page 99 6. Click Continue and OK in the next NDPS window. Your printer will appear as an NDS object in the Directory Tree and will offer a full range of network security options. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in NetWare USB port...
Page 100 The Novell Printers dialog appears, displaying a list of installed Public or Controlled printers (if any printers have previously been installed on the workstation). 3. From the Printer Manager’s Printer pull down menu, select New. 4. Click Add. A list of available printers appears. AXIS 5570e / AXIS 5670e User’s Manual...
Page 101 AXIS5FF6A6_IPX1 in the installed list. 8. Click Close. In the Novell Printer Manager window the new installed NDPS printer appears with the name e.g. AXIS5FF6A6_IPX1 and is available for print jobs. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in NetWare...
Page 102 2. Start the Add Printer Wizard on the workstation. The Add Printer Wizard dialog will appear. Click Next. 3. Select Network printer and click Next. 4. Click Next again in the Locate Your Printer dialog (Win2000/XP) or press the Browse button (Win9X) AXIS 5570e / AXIS 5670e User’s Manual...
Page 103: Setup Using Iprint
Gateway Configuration Utility for use with earlier versions of NetWare from www.axis.com. • To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print using IPX/SPX, Axis print server firmware 5.51 or later is needed.
Page 104 Adding Printers in NetWare When you install Service Pack 6 (16 April 2003) for NetWare 5.1 or later and Service Pack 3 (16 April 2003) for NetWare 6.0 or later, the AXIS LPR Gateway Configuration will automatically be installed and configured on the NetWare Servers and ready for use.
Page 105 Now you are ready to use the AXIS IPP Gateway Configuration for installing iPrint printers. You have to have Administrator rights to install the printers through iPrint. Install a printer with 1. Use an AXIS 5570e/AXIS 5670e and connect a printer to whatever port AXIS IPP Gateway you want. Configuration Snap- 2.
Page 106 Adding Printers in NetWare Install a printer using 1. Use an AXIS 5570e/AXIS 5670e and connect a printer to whatever port AXIS LPR Gateway you want. Configuration Snap- 2. Connect the print server to the network. 3. Connect the Power Adapter.
Page 107 3. After installing a printer, it is added to the user's Printer folder. Users can print to the printer by selecting it from any application. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in NetWare...
Page 108: Basic Setup With Axis Netpilot
1. Start AXIS NetPilot by double-clicking the NetPilot icon, which is located in the folder where you installed AXIS NetPilot. 2. Locate the Axis Network Print Server in the ‘New Axis Units’ folder. Select it and click the Install button on the AXIS NetPilot toolbar. If your network is large, it could take a few seconds before the print server appears in the folder.
Page 109 If you find, at any time, that printing is not satisfactory, the parameters can easily be changed to tune the system to your requirements. • For information on advanced functions, please refer to the AXIS Network Print Server Tech- nical Reference. You can download this or other technical information over the Internet by accessing www.axis.com AXIS 5570e / AXIS 5670e User’s Manual...
Page 110: Advanced Installation Using Axis Netpilot
Having installed your Axis Network Print Server print server in accordance with the basic installation procedures described in Basic Setup with AXIS NetPilot, on page 108, your Axis Network Print Server print server should now feature in the ‘Network Print Servers’ folder located in the AXIS NetPilot main window.
Page 111 8. Select Print Server Mode or Remote Printer Mode. If you selected Print Server Mode, advance directly to step 11, otherwise continue with step 9. 9. Select an appropriate NetWare Print Server name, that will be associated with the Axis Network Print Server, by using the Browse... button. Notes: •...
Page 112: Basic Queue-Based Printing Over Ip
Adding Printers in NetWare Basic Queue-based printing over IP Axis print servers with software version 6.0 or later allow users to print in a Pure IP environment using traditional queue-based printing (which usually uses the IPX transport protocol). Note that only NDS queue-based printing is supported.
Page 113 Print Server Mode The Axis Network Print Server logs in to a file server(s) and repeatedly polls the print queues for print jobs. In this fashion, the Axis Network Print Server emulates a NetWare print server, which is a workstation running PSERVER.
Page 114 Printer Status The Printer Status menu, detailed below, shows the status of an active print job serviced by an Axis Network Print Server. It displays detailed information concerning the active job including, Print Queue, print job description, size of print file, percentage of job completed, etc. You can also abort or pause the print job from this menu.
Page 115: Adding Printers In Unix/Linux
X Window System installed, or if you prefer the text-based interface. Log in as root (or use the command su to temporarily change to the root user), and type the command /usr/sbin/printconf-tui from a shell prompt. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in UNIX/Linux...
Page 116: Typical Invocation Via A Windows Manager
Five types of print queues can be configured in the Mandrake distribution: • Local Printer • Printer on remote lpd server • Network printer (TCP/Socket) • Printer on SMB/Windows 95/98/NT server • A printer device URl AXIS 5570e / AXIS 5670e User’s Manual...
Page 117: Typical Invocation From A Terminal Window
1. Select the Network printer radio button and click Next. 2. Enter the IP address or host name of the print server as well as the port you want to use. Port numbers available for TCP/IP are: Ports numbers AXIS 5570e AXIS 5670e Also see “TCP Ports Opened for Raw Printing”...
Page 118: Debian 3.0
Valid characters are a - z, A - Z, 0 - 9, -, and _. to which the printer is attached. input filter. AXIS 5570e / AXIS 5670e User’s Manual (in XTERM or printtool...
Page 119: Red Hat 7.3
To remove this printer from the list, select it from the list and click the Delete button. AXIS 5570e / AXIS 5670e User’s Manual at a shell prompt,...
Page 120 Find your printer from the expanded list, and click the arrow beside the printer name. A list of drivers for your printer will appear. Select one. Then finish the Wizard in the usual manner. window. AXIS 5570e / AXIS 5670e User’s Manual...
Page 121: Suse 8.0
• LPD protocol network printing (Forward queue to a remote LPD and Prefiltered queue for an LPD forwarding queue) • Other network printing (Samba/Windows, Novell) The SuSE installation manual explains the setup procedures in detail. AXIS 5570e / AXIS 5670e User’s Manual Adding Printers in UNIX/Linux to invoke this lprsetup...
Page 122: Axis Axinstall Script
PROS, LPR, FTP or Reverse Telnet protocols. However, if you want to integrate the AXIS 5570e/AXIS 5670e with your host spooler, you can use the Axis automatic installation script axinstall. The axinstall script is available from ftp://ftp.axis.com/pub_soft/prt_srv/utility/axinstall/latest/...
Page 123: Print Methods On Tcp/Ip Networks
This is the recommended method for UNIX/Linux systems, but some System V versions do not support LPD. Advantages: Easy to set up — install the AXIS 5570e/AXIS 5670e as a remote queue in System V, or add a remote printer to fields (BSD).
Page 124 A protocol developed at Axis. Comes in two versions; named pipe (PROS A) and filter (PROS B). PROS A The AXIS 5570e/AXIS 5670e appears as a device to the system. This Advantages makes all filter and model options available. It provides accounting and status logging.
Page 125: Adding Printers In Os/2
2. Select a printer driver and double-click a free Output port, for instance \PIPE\LPD0. 3. Enter the host name or the IP address of the Axis Network Print Server in the LPD server field. 4. Enter one of the Axis Network Print Server logical printer names, for example pr1, in the LPD printer field.
Page 126: Netbios/Netbeui Printing In Os/2
Repeat this procedure for each server using the Axis Network Print Server. The AXIS Print Utility for OS/2 must be running in order to print through your Axis Network Print Server. It is strongly recommended that you modify the startup.cmd file, enabling AXIS Print Utility for OS/2 to automatically start when your client is re-booted.
Page 127 4. Enter the Alias name, select a Server name and the previously created Spooler Queue Name. 5. Click OK. The setup is completed and you can now print through your Axis Network Print Server. AXIS 5570e / AXIS 5670e User’s Manual...
Page 128: Management And Configuration
“Setting the IP Address” on page 16, you are free to access the Axis Network Print Server Web pages from any standard Web browser. The Web interface of the Axis Network Print Server is divided into two modes of operation, User mode and Admin mode. User In User mode you can change language, but you have no rights to change any other parameters.
Page 129 This is done from the Admin | General Settings | General tab. Enter the password in the Root Password field. Accessing the Web Follow the steps below to access the internal Web pages of the Axis Pages Network Print Server: 1.
Page 130 The Help page presents you with basic information about the Axis Network Print Server and the Web user interface. A short description of the Axis installation tools you should use when installing a printer on your PC is also included.
Page 131 Network Settings From the Network Settings page you can set all parameters that control the network traffic to and from the Axis Network Print Server. You can enable or disable any of the supported network protocols and fine-tune the parameter settings. For additional information, see the Online Help pages.
Page 132 • IP Address (INT_ADDR.) • DHCP enabled (DHCP_ENB) • Installed certificate • Private key See The Test Button, on page 208 for instructions on performing a Factory Default. Firmware Upgrade Upgrades the print server’s internal software. AXIS 5570e / AXIS 5670e User’s Manual...
Page 133: Using Axis Thinwizard For Print Server Management
To install, follow the instructions given by the Installation Wizard. During the installation, you will be asked to enter a user id and a password — these will be used when logging in to AXIS ThinWizard, so please take a note of them.
Page 134 3. Click the link of the AXIS 5570e/AXIS 5670e to access its internal Web page. 4. The ‘Srv’ and ‘Dev’ columns show the status of your print servers and printers.
Page 135: Using Ftp For Print Server Management
Changing the IP Using AXIS ThinWizard you can also set or change each print server’s IP Settings parameters. 1. Click IP Settings in the main menu. 2. Select print server in the list. 3. Enter your data: IP address, Subnet mask, Default gateway and the print server’s password (default password is pass).
Page 136 • It is important that the destination file is specified in capital letters. Otherwise the edits are temporary and will be lost once the Axis Network Print Server has been powered off. • To edit the config file from a Macintosh you will need FTP support such as MacTCP, Fetch or Anarchie.
Page 137: Using Telnet
Using Telnet Having assigned an IP address to your Axis Network Print Server, as described in “Setting the IP Address” on page 16, you can manage your Axis Network Print Server using the Telnet protocol.
Page 138 Status file assigned to, and their current status. Follow the instructions below to view the status file using telnet: 1. Log in to the Axis Network Print Server by typing: telnet <host name> (Windows and OS/2) or in a UNIX shell.
Page 139 Printing Hexdumps The Axis Network Print Server allows you to record a trace of the communication between the Axis Network Print Server and the host. The Axis Network Print Server supports hexdump printing for the SNA, TN3270E, TN5250E, LPR/LPD and Raw TCP/IP printing protocols. Please refer to “Protocols and Datastreams”...
Page 140: Using Snmp
MIBs (Management Information Base), where MIB-II is a standard database. The Axis Network Print Server supports all relevant parts of MIB-II and also includes a private enterprise MIB. Refer to The AXIS MIB, on page 140. System Requirements...
Page 141: Using Novell Utilities
Printer Status The Printer Status menu, detailed below, shows the status of an active print job serviced by an Axis Network Print Server network print server. It displays detailed information concerning the active job including, Print Queue, print job description, size of print file, percentage of job completed, etc.
Page 142: Configuring The Print Server From An Ibm Host
Management and Configuration Configuring the Print Server from an IBM Host Once communication with an IBM host has been established, all the Axis Network Print Server parameters can be edited by printing a file containing special configuration commands. To start the configuration, the command password must be provided.
Page 143 SAVE; %CONFIG- For parameters requiring more than one value, the values should be separated using a comma. AXIS 5570e / AXIS 5670e User’s Manual Management and Configuration (If you have not changed the default password (pass), the password is optional)
Page 144: Configuration Possibilities
Configuration Possibilities Section 12 Configuration Possibilities This section describes some special features offered by the AXIS 5570e/AXIS 5670e: Autodetect Printer Type, on page 144 Auto-IP, on page 144 Changing Language in the Print Server’s Web Interface, on page 145 E-mail Notification, on page 145...
Page 145: E-Mail Notification
In order to determine who the e-mail recipients will be of these different trouble-reports, follow these instructions: 1. From your print server’s internal Web page, go to: Admin | Network Settings | Detailed View | e-mail Notification. The following options will...
Page 146: Ipp (Internet Printing Protocol)
Printing System Web site at www.cups.org). • If you wish to print using iPrint over IPP, use AXIS IPP Gateway Configuration Snap-in for iPrint in NetWare 5.x. It is available on www.axis.com (Support | Select Software). See its read-me file for installation instructions.
Page 147 Address Schemes for When using IPP printing, you need to know the IP address or host name IPP Printers of your Axis print server. IPP is a client/server type protocol which comprises two industry standards: • the 1.0 standard, which uses an http:// address scheme •...
Page 148 1. Select the IPP printer to which you want to send your document. Choose the destination printer from the Printer name field (in File | Print). 2. When you press Print, the print job is sent over the Internet to the AXIS 5570e/AXIS 5670e, which then forwards the print job to the destination printer.
Page 149 Network print server. Choose My Computer and click Next. 5. In the Available Ports window, click Add Port: 6. The Printer Ports dialog will appear, showing a list of Available Printer Ports. AXIS 5570e / AXIS 5670e User’s Manual Configuration Possibilities...
Page 150 7. Choose The HP Internet Printer Connection Port and click New Port. 8. The HP Internet Printer Connection will start. Click Next. 9. In the IP Address, Host Name or URL field, type the address of the AXIS 5570e/AXIS 5670e to which the destination printer is connected. The URL...
Page 151 Adding an IPP printer to your printer list is described below. 2. When you press Print, the print job is sent over the Internet to the AXIS 5570e/AXIS 5670e, which then forwards the print job to the destination printer.
Page 152 Select the printer driver from the list and click OK. 7. The Wizard will ask you if you want the printer to be your default destination printer. Make your choice and click Next to complete the Add Printer Wizard installation. AXIS 5570e / AXIS 5670e User’s Manual...
Page 153 Configuration Possibilities 8. The new printer is added to your Select Printer window: 9. You are now ready to print using IPP: specify your new destination printer from the printer list and click Print. AXIS 5570e / AXIS 5670e User’s Manual...
Page 154: Logical Printers For Customized Printing
• The examples should only be viewed as suggestions how to configure the logical printers. You should, of course, configure them according to the needs of your network. • In the Parameter List chapter of this manual, you can find a complete list of the AXIS 5570e/AXIS 5670e parameters.
Page 155 Your network contains a host using the character set ISO 8859-2 and a host using the character set DEC. In order to direct print jobs to the printer connected to the AXIS 5570e/AXIS 5670e, you should assign the host to a separate logical printer, and install a character set conversion filter.
Page 156 &l1H (hex 1B 26 6C 31 48 ). The string after print Hex Code Explanation length of the string you want to replace the string you want to replace length of the substitute string 0D 0A the substitute string AXIS 5570e / AXIS 5670e User’s Manual &l4H...
Page 157 3. Enter the string 01 0A 02 0D 0A 03 1B 47 31 02 1B 59 in the String Substitutions text field. Click the OK button. Note: Extensive use of string substitutions will naturally decrease the throughput rate of the AXIS 5570e/AXIS 5670e. ASCII to Postscript The AXIS 5570e/AXIS 5670e logical printers can translate ASCII print Conversion data into PostScript format.
Page 158 120 = 12 characters per inch 60 = 6 lines per inch 30 = 3 mm left margin 50 = 5 mm top margin AXIS 5570e / AXIS 5670e User’s Manual Comment 0 = disable line wrap 100 = 10 char per inch 60 = 6 lines per inch 30 = 3.0 mm...
Page 159 • If both printers are busy, the print job will be printed on the printer that first finishes its active print job. Read Back of The AXIS 5570e/AXIS 5670e support bi-directional printing. The information information from the printer is read back on the parallel port when the parameter Read Back Port (PRx_IN.) has the default setting of AUTO.
Page 160 3. Set the Hex Dump Mode Enabled radio button to YES. 4. Click OK. Note: The page length for hex dump printouts is determined by the lines per page value of the PostScript page format parameter. AXIS 5570e / AXIS 5670e User’s Manual...
Page 161: Network Speed
AXIS 5570e / AXIS 5670e User’s Manual Configuration Possibilities Comment This is the default value where the print server detects which speed is op- timal for each network package you transfer. 10 Half Duplex 10 Full Duplex 100 Half Duplex...
Page 162: Netware Packet Signature Levels
SIGNATURE LEVEL = n Key to Print Server Levels 1 (default) Regardless of server level, the AXIS print server has the capability to log in in Print Server Mode since it supports NCP Packet Level 3 (which is the most restrictive).
Page 163: Tcp/Ip Restrictions
TCP/IP Restrictions In a new and unconfigured Axis Network Print Server any user is allowed to send TCP/IP print jobs. Using a restriction list you can reject TCP/IP printing from specified IP addresses. Enabling TCP/IP In the print server’s Web interface, select Admin | Network Settings | Restrictions Detailed View | TCP/IP Printing.
Page 164: Enabling Secure Web Services - Ssl/Tls
Configuration Possibilities Enabling Secure Web Services — SSL/TLS In a new and unconfigured AXIS 5570e/AXIS 5670e, SSL/TLS is disabled. Certificates To use SSL/TLS you have to create or obtain a digital certificate. There are two kinds of certificates: self-signed certificates and third party certificates.
Page 165 Current Date (yyyy/mm/dd): • Validity Duration (in days): * Common Name denotes the name given to the print server in the network. If you do not have a DNS server on your network, you must include the domain name, e. g. xxx@company.com Click Finish.
Page 166 Configuration Possibilities Disabling Protocols To further increase security, you must disable protocols that are considered insecure; • FTP (used by AXIS ThinWizard. If FTP is disabled, AXIS ThinWizard can not function properly.) • Telnet • Auto-IP • DHCP • BOOTP •...
Page 167: Enabling The Snmp3 Protocol
To update the initial user, select Admin | Network Settings | Detailed View User | SNMP, enter the two passwords (one for authentication and one for privacy) and click the Update initial user button. AXIS 5570e / AXIS 5670e User’s Manual Configuration Possibilities...
Page 168: Overriding Port Status
Configuration Possibilities Overriding Port Status Some USB printers do not deliver correct port status to the print server (for instance always reporting printer off-line even if the printer is on- line). If you set the Override Portstatus parameter to Yes, the print server will ignore the port status.
Page 169: Upgrading The Firmware
Section 13 Upgrading the Firmware Upgrading the Firmware You can upgrade the AXIS 5570e/AXIS 5670e firmware using one of the following methods: • AXIS ThinWizard (TCP/IP) • From the print server’s internal Web pages (TCP/IP) • FTP (TCP/IP) Note: Updating instructions are supplied with the firmware release notes.
Page 170 TCP/IP Network. Caution! Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may have to be re-initialized by your dealer. The objective of this example is to upgrade a print server to firmware version 7.00.
Page 171: Obtaining The Software
1. From www.axis.com, download the firmware and save it to a new directory on your computer, e.g. c:\Axis (if the directory does not exist, create it). 2. Open a command prompt from Start => Run. The Run window will appear.
Page 172: Sna Parameter Overview
An overview of how parameters are mapped during the auto- configuration process is also provided. Refer to the Parameter List document on www.axis.com for a complete description of the Axis Print server parameters. Communication Parameters In most environments, the basic communication parameters need to be customized in order to establish a communication link to the host system.
Page 173 Server will appear as a 3174 PU 2.0 node to the host. This mode may be used for both mainframe and AS/400 environments. When set to 5494, the Print Server will appear as a 5494 PU2.1 node to the host. This is the recommended mode for the AS/400 environment. The 5494 mode cannot be used in the mainframe environment.
Page 174: Updating Parameters
SNA Parameter Overview Parameter Description - Axxxxxxx, where "xxxxxxx" is the last 7 characters of the Axis Network Print Server serial number, in reverse order, e.g. if s.no. = 00 40 8C 1B 06 D4 the default LU Name = A4D60B1C.
Page 175: Auto-Configuration And Mapping
AUTODIAL to YES to initiate a new configuration process. Auto-configuration and Mapping The configuration created in the AS/400 and the mapping to the Axis Network Print Server as a result of the auto-configuration process is illustrated by the figure below.
Page 176 SNA Parameter Overview Illustration of the configuration created in the AS/400 and the mapping to the Axis Network Printer Device Through auto-configuration, the APPC controller, APPC device, RWS Descriptions controller as well as printer device descriptions for the logical printers, will be created automatically.
Page 177: Sna Gateways
Communications Controller, IBM 3174 Establishment Controller, IBM 3172 LAN Interconnect Controller, etc. You need to set up at least one PU and LU definition for each Axis Network Print Server on the host, as described in the VTAM section. When attaching an Axis Network Print Server to a remote pass-through gateway, you need to set the mapping of SDLC or sub-channel address to MAC address in the gateway.
Page 178 Concentrator gateway, This is an outline of the procedure for configuring to a Microsoft SNA Microsoft Server. More information is provided in the Support section of the Axis Web site at http://www.axis.com 1. Configure host connection. 2. Configure downstream connection.
Page 179: Extended Ibm Printer Emulation
(Substitute Strings). Up to 128 pairs of Match/Substitute Strings may be defined. AIC (AXIS Internal Codes) are listed in the AXIS Network Print Server Technical Reference. Font Selection Fonts can be selected directly by FGID (Extended Emulation commands or SCS SFG commands) or indirectly by pitch SCS SCD/SPD commands.
Page 180 Bar Codes The bar code function provides easy access to a range of standard bar code types resident in the Axis Network Print Server. Bar codes can only be printed on PCL printers. Before the bar codes can be printed, a bar code format has to be defined.
Page 181 %/BAR 0,"0123456"; Resulting printout: AXIS Cobra products The Axis Network Print Server supports a subset of the extended printer compatibility emulation syntax of the AXIS Cobra products, including the bar codes syntax. For more information, please refer to the AXIS Network Print Server Technical Reference supplied on the AXIS Network Product CD.
Page 182: Ibm Fonts
IBM font. The IBM to PCL font mapping is controlled by the Font Definition Table. All entries in this table are fully editable, and you can also add new entries. Refer to DBCS Support, on page 197 for details on DBCS font types supported by the Axis Network Print Server. Available Fonts The fixed pitch fonts are not scalable.
Page 183 AXIS 5570e / AXIS 5670e User’s Manual OCR-B Orator Courier 10 Prestige Pica Artisan 10 Courier Italic 10 OCR-A Pica Math Symbol 10 Pitch 10 CPI Fonts Orator Bold Gothic Bold 10 Gothic Text 10 Roman Text 10 Serif Text 10...
Page 184 Univers Medium Condensed 3854 Univers Bold Condensed 3855 Univers Medium Condensed Italic 3856 Univers Bold Condensed Italic 3857 Antique Olive 3858 Antique Olive Bold 3859 Antique Olive Italic 3860 Garamond Antiqua 3861 Garamond Halbfett 3862 AXIS 5570e / AXIS 5670e User’s Manual...
Page 185 Proportional Typographic Fonts (Scalable - User Defined FGIDs) Proportional Typographic Fonts (Scalable Point Size) (cont.) Proportional Typographic Fonts (Scalable Point Size) AXIS 5570e / AXIS 5670e User’s Manual Garamond Kursiv 3863 Garamond Kursiv Halbfett 3864 Marigold 3865 Albertus Medium 3866...
Page 186: Ibm Print Formatting
IBM 4230 model 101 matrix 4230_tx printer 5x27 002 Twinax printer: Korean 5x27_002_TX_KS (KS) 5x27 002 Twinax printer: Korean 5x27_002_ TX_KSSM (KSSM) 5x27 001 Twinax printer: 5x27_001_ TX Japanese 5x27 005 Twinax printer: 5x27_005_TX Chinese AXIS 5570e / AXIS 5670e User’s Manual...
Page 187 Coax mode Mainframe Parameter Default Name SYSL 37 US English AXIS 5570e / AXIS 5670e User’s Manual Value Description Value US English, Portuguese Alternate and Canadian Bilingual International Set 1 Canadian French Austrian/German Belgian Brazilian Danish/Norwegian Swedish/Finnish Italian 1026 Japanese English...
Page 188 DSPSYSVAL SYSVAL(QCHRID) on the command line and press Enter. The Code page value is the value of the system language (see the table above). • Visit the Axis Web site http://www.axis.com/ for more information on how to edit the char- acter translation tables Page Formats You can configure the formats for each paper bin separately from the Axis Network Print Server internal Web pages.
Page 189 ASCII Printer Driver This parameter should match the printer type you have connected to your Axis Network Print Server. Select the correct printer type from the Axis Network Print Server internal Web pages. Click Admin | IBM Emulators | Detailed View for SCS/IPDS Emulator Configuration.
Page 190: Ipds Overview
IPDS System Languages The Axis Network Print Server must be set up for the System Language of your IBM system configuration in order to obtain the correct characters in each specific language. This is done from the IBM Emulators | Detailed View (SCS/IPDS Emulator Configurations) page.
Page 191 1144 1145 1146 1147 1148 1149 Code page 1004 1252 Code page AXIS 5570e / AXIS 5670e User’s Manual System language Spanish Alternate Japanese-Katakana French Azerty International Typographic Arabic Bilingual Greek (GKB) Hebrew Multinational Internationa, Set 5 & Swiss Bilingual...
Page 192 The default setting is Disabled. Latin 3 Multilingual Latin 4 EBCDIC Latin 4 ISO/ASCII Latin 5 PC Latin 5 ISO/ANSI 8 Bit Latin 5 System language - Latin 9 EBCDIC and ASCII Latin 9 Latin 9 EBCDIC AXIS 5570e / AXIS 5670e User’s Manual...
Page 193 A downloaded 240 dpi font may appear jagged when printed on a 300 dpi Smoothing printer. The Axis Network Print Server uses a font smoothing feature to enhance the appearance of these fonts. The font smoothing may be disabled if you want to speed up the font loading or if your printer has insufficient PostScript virtual memory.
Page 194: Ipds Fonts
Enabling this feature will require more free Postscript Virtual Memory in the printer. Virtual This value defines how much memory the Axis Network Print Server can Memory kB use in the PostScript printer for storing resources. The default value is 2000 kbytes.
Page 195: Printer Resident Fonts
Printer Resident Fonts The rest of this section deals with printer resident fonts. The non-standard PostScript fonts are resident in the Axis Network Print Server (OCR-B is one example), so you do not need font cards etc. to use the listed fonts.
Page 196: Immediate Font Substitutions
(6 points). Scalable Fonts If the selected font width (point size) is not available for the selected FGID, the Axis Network Print Server will set a point size in one of the following ways depending on the font: Times Roman,...
Page 197: Dbcs Support
Korea (KS) Korea (KSSM) Japan China Important! The Axis Network Print Server supports SNA DBCS printing in IBM 5494 emulation only. Configuring the AS/400 Host, 5494 CU mode Follow the instructions below to configure the AS/400 Host for DBCS support: 1.
Page 198: Verifying The Communications Link
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator. 2. Enter the IP address or the host name of the Axis Network Print Server in the location field and press the Enter key on your keyboard. The internal Web pages of the Axis Network Print Server will appear.
Page 199: Extended Ibm Printer Emulation
<SI> (SCS Shift In Control Code) %CONFIG+ SAVE; %CONFIG- <SO>(SCS Shift Out Control Code) AXIS 5570e / AXIS 5670e User’s Manual Device features 2424K1 2424J1 2424S1 Device features and Last Code Point for Country options Example (with DBCS mode before entering extended emulation)
Page 200: Font Tables
DBCS Support Font Tables The following tables define the DBCS font types supported in the Axis Network Print Server (5494 CU Mode): DBCS FONTS (Japan) FGID 50000 50001 50014 50002 50015 50003 50016 50007 50008 50019 50004 50005 50017 50009...
Page 201 50035 50047 50039 50050 50036 50048 50040 50051 50041 50042 50052 50043 50053 AXIS 5570e / AXIS 5670e User’s Manual DBCS FONTS (Korea KSSM) IBM Font Name FGID HanYang 10 CPI 50130 HanYang 10 CPI 50131 HanYang 10 CPI 50144...
Page 202: Digital Copier Support
From the drop-down list of supported copiers, select the digital copier that you have connected the Axis Network Print Server to. Copier Duplex The Axis Network Print Server supports duplex printing i.e. printing on both sides of the paper. The options in the drop-down list are: •...
Page 203 Digital Copier to check that all the options are supported. If you experience problems with this functionality the Digital Copier printing options may have been set inconsistently. Please check your configuration settings and try again. AXIS 5570e / AXIS 5670e User’s Manual Digital Copier Support...
Page 204: Ip Addressing
Part one (‘192.168.3’) identifies the network on which the device resides. • Part two (‘.191’) identifies the device within the network. This type of IP address generally operates on a subnet mask of ‘255.255.255.0’. AXIS 5570e / AXIS 5670e User’s Manual...
Page 205 With this method you must enter an IP Address and the subnet mask manually on every device. Using a static IP and subnet mask means the address is permanently fixed. AXIS 5570e / AXIS 5670e User’s Manual IP address Subnet Mask 192.168.3.191...
Page 206 Notes: • The default host name of the print server is ’AXIS’ followed by the last 6 digits in the serial number. e.g. AXIS181636. The host name (Print server name) can be changed in the PS_NAME.
Page 207 If you are using WINS or DNS, you should include at least one WINS or DNS server IP address in the DHCP scope. Immediately after the IP address has been received, the print server registers its host name and IP address on the WINS alternatively DNS server. Refer to “Registering and Resolving Host Names”...
Page 208: The Test Button
This should take about 20 seconds. 4. Restart the print server by disconnecting and reconnecting the external power supply Important! A Factory Default will reset all AXIS 5570e/AXIS 5670e parameters and settings to their default values except: • Installed certificate •...
Page 209: Troubleshooting
Please visit the Axis Web site for latest troubleshooting tips, more support and additional help through the FAQ database or to fill in and submit a Support question.
Page 210 Ping Ping can determine whether that IP address is accessible. Ping can also help you to determine IP address conflicts with your AXIS 5570e/AXIS 5670e and troubleshoot TCP/IP problems on the network. Follow the instructions below to diagnose your problem.
Page 211 Axis Support In order to obtain optimal support from Axis support technicians, please Server Report follow these instructions when filling in and submitting a Support question. 1. Go to the print server’s Web pages by typing the print server’s IP address in the Address/Location field of your Web browser.
Page 212: Technical Specification
All Unix systems supporting TCP/IP (Linux, BSD, System V, Solaris, HP- UX, IBM AIX, Silicon Graphics IRIX, etc.) Additional Systems Other systems supporting TCP/IP: IBM (MVS, VM, VSE, OS/400), DEC, VMS Microsoft LAN Manager IBM LAN Server LANtastic AXIS 5570e / AXIS 5670e User’s Manual...
Page 213 AXIS AddPrinter for easy and automated installation in Windows environments Internal Web pages or FTP for installation, configuration, monitoring and firmware upgrading SNMP-MIB II compliant (RFC 1213), Axis private enterprise MIB included Netware: Full PCONSOLE, NWAdmin, ConsoleOne and iPrint-iManager support Firmware Upgrade Firmware upgrade using AXIS ThinWizard, the print server’s Web pages...
Page 214 USB: USB 1.1 Low and Full speed. Successfully tested with USB 2.0 Printers Note: If the AXIS 5570e is powered from the printer via the parallel port (i.e. instead of via the Power Adapter), the USB port will be switched off.
Page 215 -C-TICK AS/NZS 3548 -Compliance to FCC part 15 Subpart B, Class B Safety EN 60950 Included Accessories AXIS Network Product CD with software for installation, management and printing, including AXIS ThinWizard (the recommended Axis management software) User documentation Quick Installation Guide Power adapter All specifications are subject to change without prior notice.
Page 216: The Parameter List
The Parameter List Section 26 The Parameter List These are the default parameters in a new, unconfigured print server. A complete list of all Axis print server parameters can be found on www.axis.com AXIS 5570e (AXIS 5570e Network Print Server V7.06 Nov...
Page 217 PROS_PRT. LPD_BANN. DEFAULT_RAW_TCP. : 9100-9101 AXIS 5570e / AXIS 5670e User’s Manual : OFF, 0 0 0 0, 23, PR1, 1, AXPR1 : OFF, 0 0 0 0, 23, PR2, 2, AXPR2 : OFF, 0 0 0 0, 23, PR3, 3, AXPR3...
Page 219 PR1_NAME. PR1_SCND. PR1_WAIT. PR1_IN. PR1_BEF. PR1_STR. PR1_CSET. 7FR>IBM, 7ND>IBM, DEC>IBM) AXIS 5570e / AXIS 5670e User’s Manual : YES : FR_802_2 (FR_AUTO, FR_802_2, FR_DIX) : AX181EC4.LP1 : PR1 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8, : AX181EC4.US1 : PR2...
Page 220 (NONE, ISO>IBM, 7UK>IBM, 7SW>IBM, 7GE>IBM, : NONE (NONE, POSTSCR, AUTO_PS) : NO : A4 (A4, LETTER, LEGAL, EXECUT) : PORTR (PORTR, LANDS, R_PORTR, R_LANDS) : 66 0 100 60 30 50 : NONE (NONE, Canon_GP335, Canon_GP605, AXIS 5570e / AXIS 5670e User’s Manual...
Page 221 TOP_LEFT_VERTICAL, TOP_RIGHT, BOTTOM_LEFT, BOTTOM_RIGHT, TOP_DOUBLE, LEFT_DOUBLE, CENTER) PR3_DC_HOLE. : OFF PR3_DC_FOLD. : OFF PR3_DC_TRAY. : DEFAULT PR3_DC_COP. AXIS 5570e / AXIS 5670e User’s Manual : OFF (OFF, SIMPLEX, LONG_EDGE_BINDING, (OFF, TOP_LEFT_SLANT, TOP_LEFT_HORIZONTAL, (OFF, LONG_EDGE, SHORT_EDGE) (OFF, HALF_FOLD, Z_FOLD) (DEFAULT, 1, 2, 3, 4, 5)
Page 223 Sharp_AR286_FN1, Sharp_AR336_FN1, Sharp_AR405_FN1, Sharp_AR505_FN1, Sharp_AR286_FN2, Sharp_AR336_FN2, Sharp_AR405_FN2, Sharp_AR505_FN2, Toshiba_DP_4580, Toshiba_DP_5570, Toshiba_DP_6570, Toshiba_DP_8070, Toshiba_eSTUDIO35, Toshiba_eSTUDIO45, Toshiba_eSTUDIO55, Toshiba_eSTUDIO65, Toshiba_eSTUDIO80, Custom_copier_driver) AXIS 5570e / AXIS 5670e User’s Manual : NONE (NONE, Canon_GP335, Canon_GP605, : OFF (OFF, SIMPLEX, LONG_EDGE_BINDING, (OFF, TOP_LEFT_SLANT, TOP_LEFT_HORIZONTAL, (OFF, LONG_EDGE, SHORT_EDGE)
Page 224 (OFF, LONG_EDGE, SHORT_EDGE) (OFF, HALF_FOLD, Z_FOLD) (DEFAULT, 1, 2, 3, 4, 5) : USB1 (NONE, LPT1, USB1) : PR8 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8) : YES : AUTO (AUTO, NONE) AXIS 5570e / AXIS 5670e User’s Manual...
Page 225 --- DC PCL Staple Menu PAR_CUST_DC_PCL_STP_TOP_L_SLN. : PAR_CUST_DC_PCL_STP_TOP_L_HOR. : PAR_CUST_DC_PCL_STP_TOP_L_VER. : PAR_CUST_DC_PCL_STP_TOP_RIGHT. : PAR_CUST_DC_PCL_STP_LOW_LEFT. : PAR_CUST_DC_PCL_STP_LOW_RIGHT. : AXIS 5570e / AXIS 5670e User’s Manual : NONE (NONE, ISO>IBM, 7UK>IBM, 7SW>IBM, 7GE>IBM, : NONE (NONE, POSTSCR, AUTO_PS) : NO : A4...
Page 226 --- DC PS Punch Menu PAR_CUST_DC_PS_PUNCH_LONG. : PAR_CUST_DC_PS_PUNCH_SHORT. : --- DC PS Fold Menu PAR_CUST_DC_PS_FOLD_HALF. : PAR_CUST_DC_PS_FOLD_Z. : --- DC PS Media Menu PAR_CUST_DC_PS_MEDIA_DEFAULT. : PAR_CUST_DC_PS_MEDIA_TRAY1. : PAR_CUST_DC_PS_MEDIA_TRAY2. : PAR_CUST_DC_PS_MEDIA_TRAY3. : (None, PS, PJL, PCL, PS_PJL) AXIS 5570e / AXIS 5670e User’s Manual...
Page 227 PS_DEST. --- IBM IPDS PCL Driver Settings PCL_VER. PCL_SBSET. Latin9, PC437, PC850, PC852, Roman8, ISO8859-7) PCL_OCR_ENB. : Enabled AXIS 5570e / AXIS 5670e User’s Manual : HISPEED (IBM_PC, STNDRD, FAST, HISPEED, HINOACK, : 60 (DISABLE, AUTO) : AUTO (DISABLE, AUTO)
Page 229 DCPI3. AUTORI3. LM3. TM3. LDSF3. DEFBIN3. MANUAL, ENVELOPE, CONTINUOUS) AXIS 5570e / AXIS 5670e User’s Manual : 3816_CX (3287_CX, 3268_CX, 3262_CX, 4214_CX, : 37 (37, 256, 260, 273, 274, 275, 277, 278, 280, : NO : 66, ENA : 132, ENA...
Page 231 DCPI6. AUTORI6. LM6. TM6. LDSF6. DEFBIN6. MANUAL, ENVELOPE, CONTINUOUS) AXIS 5570e / AXIS 5670e User’s Manual : 3816_CX (3287_CX, 3268_CX, 3262_CX, 4214_CX, : 37 (37, 256, 260, 273, 274, 275, 277, 278, 280, : NO : 66, ENA : 132, ENA...
Page 233 --- IBM SCS JOB CONTROL REINIT. SUPFFBLANK. --- IBM 3270 OPTIONS CASE. BASCOL. XSTRN. AXIS 5570e / AXIS 5670e User’s Manual : 3816_CX (3287_CX, 3268_CX, 3262_CX, 4214_CX, : 37 (37, 256, 260, 273, 274, 275, 277, 278, 280, : NO : 66, ENA...
Page 235 UPRIGHT,BOLD, FONT. UPRIGHT,MEDIUM,4099, FONT. ITALIC,MEDIUM,4099, FONT. UPRIGHT,BOLD, FONT. UPRIGHT,MEDIUM,4099, AXIS 5570e / AXIS 5670e User’s Manual : HP_PCL (DISABLE, HP_PCL, EPSON_LQ) : HP_PCL (DISABLE, HP_PCL, EPSON_LQ) : 1B 26 6C 31 54 : PC850 (ECMA94, ISO8859-7, LATIN9, PC437, PC850, FGID...
Page 236 DEFAULT,FIXED, 4099, : 252, DEFAULT,FIXED, : 253, DEFAULT,FIXED, 4099, : 254, DEFAULT,FIXED, : 258, DEFAULT,FIXED, : 266, DEFAULT,FIXED, 4099, AXIS 5570e / AXIS 5670e User’s Manual 120, 120, 120, 130, 120, 120, 130, 120, 120, 110, 110, 110, 110, 110,...
Page 237 ITALIC,MEDIUM,4148, FONT. ITALIC,BOLD, FONT. MEDIUM,4148, FONT. BOLD, FONT. MEDIUM,4148, FONT. BOLD, AXIS 5570e / AXIS 5670e User’s Manual : 281, DEFAULT,FIXED, : 289, DEFAULT,FIXED, : 290, DEFAULT,FIXED, : 751, 100, DEFAULT,PROP, : 1051, 100, DEFAULT,PROP, : 1053, 100, DEFAULT,PROP, 4101,...
Page 239 FONT. UPRIGHT,MEDIUM,28752, FONT. UPRIGHT,MEDIUM,28752, FONT. UPRIGHT,MEDIUM,28752, FONT. UPRIGHT,MEDIUM,28752, FONT. UPRIGHT,MEDIUM,28752, AXIS 5570e / AXIS 5670e User’s Manual : 17079,100, DEFAULT,PROP, : 17099,100, DEFAULT,PROP, 4101, : 33335,100, DEFAULT,PROP, : 33355,100, DEFAULT,PROP, 4113, : 33463,100, DEFAULT,PROP, : 33483,100, DEFAULT,PROP, 4113, : 33591,100, DEFAULT,PROP,...
Page 240 28 31 39 48 1B 26 74 33 38 50 : 50032,100, PC891,PROP, 28 31 39 48 1B 26 74 33 38 50 : 50033,100, PC891,PROP, 28 31 39 48 1B 26 74 33 38 50 AXIS 5570e / AXIS 5670e User’s Manual 101, 144, 120, 108,...
Page 241 UPRIGHT,MEDIUM,41040, FONT. UPRIGHT,MEDIUM,41040, FONT. UPRIGHT,MEDIUM,41040, AXIS 5570e / AXIS 5670e User’s Manual : 50034,100, PC891,PROP, 28 31 39 48 1B 26 74 33 38 50 : 50035,100, PC891,PROP, 28 31 39 48 1B 26 74 33 38 50 : 50036,100, PC891,PROP,...
Page 242 28 31 38 43 1B 26 74 33 38 50 : 50102,100, PC903,PROP, 28 31 38 43 1B 26 74 33 38 50 : 50103,100, PC903,PROP, 28 31 38 43 1B 26 74 33 38 50 AXIS 5570e / AXIS 5670e User’s Manual 144, 144, 120, 108,...
Page 243 UPRIGHT,MEDIUM,37058, FONT. UPRIGHT,MEDIUM,37058, FONT. UPRIGHT,MEDIUM,37058, AXIS 5570e / AXIS 5670e User’s Manual : 50104,100, PC903,PROP, 28 31 38 43 1B 26 74 33 38 50 : 50105,100, PC903,PROP, 28 31 38 43 1B 26 74 33 38 50 : 50106,100, PC903,PROP,...
Page 244 28 31 38 48 1B 26 74 33 38 50 : 50148,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 : 50149,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 AXIS 5570e / AXIS 5670e User’s Manual 144, 144, 120, 108,...
Page 245 OUT_OF_PAPER_ADDRESS. : TONER_LOW_ADDRESS. : NO_TONER_ADDRESS. : PRINTER_OFFLINE_ADDRESS. : AXIS 5570e / AXIS 5670e User’s Manual : 50150,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 : 50151,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50...
Page 246 The Parameter List AXIS 5670e (AXIS 5670e Network Print Server V7.00 Oct 04 2004. S/N: 00408C639C36) Parameter settings: --- General Menu NODE_ADDR. NETWORK_SPEED. : AUTO_SENSE 10_FULL_DX, 100_HALF_DX, 100_FULL_DX) PS_NAME. ROOT_PWD. SWUP_KEY. USERS. BASE_URL. CHARSET. AXIS_PRINT_SYSTEM. : YES RCONFIG_ENB. : YES DEF_OUT.
Page 247 RTN_PR5. RTN_PR6. RTN_PR7. AXIS 5570e / AXIS 5670e User’s Manual : OFF, 0 0 0 0, 23, PR4, 4, AXPR4 : OFF, 0 0 0 0, 23, PR5, 5, AXPR5 : OFF, 0 0 0 0, 23, PR6, 6, AXPR6...
Page 249 PR1_BEF. PR1_STR. PR1_CSET. 7FR>IBM, 7ND>IBM, DEC>IBM) PR1_FILT. PR1_AFT. PR1_DUMP. AXIS 5570e / AXIS 5670e User’s Manual : PR1 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8, : AX639C36.LP2 : PR2 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8, : AX639C36.CM1...
Page 250 (NONE, ISO>IBM, 7UK>IBM, 7SW>IBM, 7GE>IBM, : NONE (NONE, POSTSCR, AUTO_PS) : NO : A4 (A4, LETTER, LEGAL, EXECUT) : PORTR (PORTR, LANDS, R_PORTR, R_LANDS) : 66 0 100 60 30 50 : NONE (NONE, Canon_GP335, Canon_GP605, AXIS 5570e / AXIS 5670e User’s Manual...
Page 251 SHORT_EDGE_BINDING) PR3_DC_STAP. : OFF TOP_LEFT_VERTICAL, TOP_RIGHT, BOTTOM_LEFT, BOTTOM_RIGHT, TOP_DOUBLE, LEFT_DOUBLE, CENTER) PR3_DC_HOLE. : OFF PR3_DC_FOLD. : OFF AXIS 5570e / AXIS 5670e User’s Manual : OFF (OFF, SIMPLEX, LONG_EDGE_BINDING, (OFF, TOP_LEFT_SLANT, TOP_LEFT_HORIZONTAL, (OFF, LONG_EDGE, SHORT_EDGE) (OFF, HALF_FOLD, Z_FOLD) (DEFAULT, 1, 2, 3, 4, 5)
Page 252 (NONE, LPT1, COM1, LPT2) : PR5 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8) : YES : AUTO (AUTO, NONE, COM1) : NONE (NONE, ISO>IBM, 7UK>IBM, 7SW>IBM, 7GE>IBM, : NONE (NONE, POSTSCR, AUTO_PS) AXIS 5570e / AXIS 5670e User’s Manual...
Page 253 Konica_Minolta_Di520, Konica_Minolta_Di620, Konica_Minolta_Pi3502, Konica_Minolta_Pi3505e, Konica_Minolta_Pi4700e, Konica_Minolta_Pi5500, Konica_Minolta_Pi5501, Konica_Minolta_Pi6500e, Konica_Minolta_Pi7200e, Konica_Minolta_Pi7500, Konica_Minolta_CF2001, Ricoh_Aficio_220, Ricoh_Aficio_270, AXIS 5570e / AXIS 5670e User’s Manual : NO : A4 (A4, LETTER, LEGAL, EXECUT) : PORTR (PORTR, LANDS, R_PORTR, R_LANDS) : 66 0 100 60 30 50...
Page 254 (A4, LETTER, LEGAL, EXECUT) : PORTR (PORTR, LANDS, R_PORTR, R_LANDS) : 66 0 100 60 30 50 : NONE (NONE, Canon_GP335, Canon_GP605, : OFF (OFF, SIMPLEX, LONG_EDGE_BINDING, (OFF, TOP_LEFT_SLANT, TOP_LEFT_HORIZONTAL, (OFF, LONG_EDGE, SHORT_EDGE) AXIS 5570e / AXIS 5670e User’s Manual...
Page 255 L1_COMMENT. L1_BIDIR. L1_READT. --- COM1 Menu C1_BAUDR. 38400, 57600, 115200) AXIS 5570e / AXIS 5670e User’s Manual (OFF, HALF_FOLD, Z_FOLD) (DEFAULT, 1, 2, 3, 4, 5) : COM1 (NONE, LPT1, COM1, LPT2) : PR8 (PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8)
Page 257 4224_CX, 4230_CX, 3812_CX, 3816S_CX, 3816_CX, 5224_TX, 5225_TX, 5256_TX, 4214_TX, 4230_TX, 3812_TX, 3816S_TX, 3816_TX, 5X27_001_TX, 5X27_002_KS_TX, 5X27_002_KSSM_TX, 5X27_003_TX, 5X27_005_TX) AXIS 5570e / AXIS 5670e User’s Manual : 0, 0, 0, 0, 0, 0 (IPDS_4224_C2, IPDS_4224_E3, : 37 (37, 256, 259, 260, 273, 274, 275, 277, 278,...
Page 258 (5.0, 6.0, 6.7, 7.5, 9.0) : YES : 0, 0, 48 : 26, 26, 74 : 100, 100, 70 : BIN1 (BIN1, BIN2, BIN3, BIN4, BIN5, BIN6, : PCL5 (USER, GENERIC, PCL4, PCL5, IBM_PRO, AXIS 5570e / AXIS 5670e User’s Manual...
Page 259 281, 282, 284, 285, 286, 287, 288, 289, 290, 293, 297, 340, 361, 500, 833, 836, 838, 870, 871, 892, 893, 1026, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, USER) AXIS 5570e / AXIS 5670e User’s Manual (IPDS_4224_C2, IPDS_4224_E3, : 37...
Page 260 (5.0, 6.0, 6.7, 7.5, 9.0) : YES : 0, 0, 48 : 26, 26, 74 : 100, 100, 70 : BIN1 (BIN1, BIN2, BIN3, BIN4, BIN5, BIN6, : PCL5 (USER, GENERIC, PCL4, PCL5, IBM_PRO, (IPDS_4224_C2, IPDS_4224_E3, AXIS 5570e / AXIS 5670e User’s Manual...
Page 261 500, 833, 836, 838, 870, 871, 892, 893, 1026, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, USER) PASSTHR8. MPL8. MPP8. LPI8. AXIS 5570e / AXIS 5670e User’s Manual : 37 (37, 256, 259, 260, 273, 274, 275, 277, 278, : PostScript (PostScript, PCL) : 3816_CX...
Page 263 PC857, PC858, PC874, PC891, PC903, PC904, PC942, ROMAN8, USASCII, USER) --- FONT STROKE TYPEFACE STRING --------------------------------------------------------------- ------------------- AXIS 5570e / AXIS 5670e User’s Manual : 025 03C : 03E 025 : 025 02F : 025 041 058 049 053 : SETALL...
Page 264 DEFAULT,FIXED, : 84, DEFAULT,FIXED, : 85, DEFAULT,FIXED, : 86, DEFAULT,FIXED, : 87, DEFAULT,FIXED, : 91, DEFAULT,FIXED, : 108, DEFAULT,FIXED, 4099, AXIS 5570e / AXIS 5670e User’s Manual 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 135, 135, 100,...
Page 265 UPRIGHT,BOLD, FONT. UPRIGHT,MEDIUM,4102, FONT. UPRIGHT,MEDIUM,4102, FONT. UPRIGHT,MEDIUM,4102, FONT. UPRIGHT,MEDIUM,4101, FONT. UPRIGHT,MEDIUM,4101, FONT. UPRIGHT,BOLD, AXIS 5570e / AXIS 5670e User’s Manual : 110, DEFAULT,FIXED, 4102, : 111, DEFAULT,FIXED, 4099, : 112, DEFAULT,FIXED, : 155, 100, DEFAULT,PROP, 4101, : 158, 100, DEFAULT,PROP,...
Page 267 ITALIC,BOLD, FONT. UPRIGHT,MEDIUM,4113, FONT. UPRIGHT,BOLD, FONT. ITALIC,MEDIUM,4113, FONT. ITALIC,BOLD, AXIS 5570e / AXIS 5670e User’s Manual : 3864, 100, DEFAULT,PROP, 4197, : 3865, 100, DEFAULT,PROP, : 3866, 100, DEFAULT,PROP, 4362, 1B 28 73 31 42 : 3867, 100, DEFAULT,PROP, 4362,...
Page 268 28 31 39 4B 1B 26 74 33 31 50 : 50010,100, PC942,PROP, 28 31 39 4B 1B 26 74 33 31 50 : 50011,100, PC942,PROP, 28 31 39 4B 1B 26 74 33 31 50 AXIS 5570e / AXIS 5670e User’s Manual 144, 144, 120, 108,...
Page 269 UPRIGHT,MEDIUM,43088, FONT. UPRIGHT,MEDIUM,43088, FONT. UPRIGHT,MEDIUM,43088, AXIS 5570e / AXIS 5670e User’s Manual : 50012,100, PC942,PROP, 28 31 39 4B 1B 26 74 33 31 50 : 50013,100, PC942,PROP, 28 31 39 4B 1B 26 74 33 31 50 : 50014,100, PC942,PROP,...
Page 270 28 31 39 48 1B 26 74 33 38 50 : 50060,100, PC904,PROP, : 50061,100, PC904,PROP, : 50062,100, PC904,PROP, : 50063,100, PC904,PROP, : 50064,100, PC904,PROP, : 50065,100, PC904,PROP, AXIS 5570e / AXIS 5670e User’s Manual 101, 144, 120, 108, 101, 144,...
Page 271 UPRIGHT,MEDIUM,37058, FONT. UPRIGHT,MEDIUM,37058, FONT. UPRIGHT,MEDIUM,37058, FONT. UPRIGHT,MEDIUM,37058, FONT. UPRIGHT,MEDIUM,37058, AXIS 5570e / AXIS 5670e User’s Manual : 50066,100, PC904,PROP, : 50067,100, PC904,PROP, : 50068,100, PC904,PROP, : 50069,100, PC904,PROP, : 50070,100, PC904,PROP, : 50071,100, PC904,PROP, : 50072,100, PC904,PROP, : 50073,100, PC904,PROP,...
Page 272 28 31 38 48 1B 26 74 33 38 50 : 50132,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 : 50133,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 AXIS 5570e / AXIS 5670e User’s Manual 101, 144, 120, 108,...
Page 273 UPRIGHT,MEDIUM,41040, FONT. UPRIGHT,MEDIUM,41040, FONT. UPRIGHT,MEDIUM,41040, AXIS 5570e / AXIS 5670e User’s Manual : 50134,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 : 50135,100, PC891,PROP, 28 31 38 48 1B 26 74 33 38 50 : 50136,100, PC891,PROP,...
Page 274 The Parameter List --- Email Menu EMAIL_NOTIFICATION. : NO REPLY_ADDRESS. : PAPER_JAM_ADDRESS. : OUT_OF_PAPER_ADDRESS. : TONER_LOW_ADDRESS. : NO_TONER_ADDRESS. : PRINTER_OFFLINE_ADDRESS. : AXIS 5570e / AXIS 5670e User’s Manual...
Page 275: Netware Parameter Combinations
NetWare Parameter Combinations In AXIS 5570e, when NetWare is enabled (i.e. when the NETW_ENB. parameter is set to “yes” in the NetWare Menu), the different settings of the NETW_TRANSPORT_PROTOCOL. and NDPS. parameters will result in these functionalities: NETW_ENB 1. Raw TCP ports 9100 = LPT1 and 9101 = USB1 are opened for NDPS Functionality printing.
Page 276: Tcp Ports Opened For Raw Printing
SNMP Device Index When using the TCP/IP protocol (and if the printer driver permits), the print server can use SNMP Status to find out if the printer is ready to accept a new job. By default, Windows uses the value “1” when addressing an SNMP device, which is correct for single port print servers.
Page 277 Enable SNMP Status SNMP Status is enabled through Windows’ printer port settings. You have a three port print server and want to enable SNMP Status for Example LPT2. The table above tells you to set the SNMP Device Index to 3.
Page 278: Glossary
Table for an entry matching the print server's Ethernet address. If a matching entry is found, the daemon downloads the IP address to the print server. Berkeley Software Distribution. The University of California, Berkeley additions to the UNIX operating system. AXIS 5570e / AXIS 5670e User’s Manual...
Page 279 This is a file that resides in the print server’s memory and contains all the parameters that determine the Axis Network Print Server functionality. By editing the config file (changing the parameter settings), you can configure the Axis Network Print Server to meet the printing needs of your network. CPGID...
Page 280 System V versions do not support LPD. Line PRinter. The Unix print command. This does not actually print files but rather copies or links them to a spool area from where a daemon copies them to the printer. AXIS 5570e / AXIS 5670e User’s Manual...
Page 281 TCP/IP application protocol. Supported on AS/400s and Mainframes for transporting IPDS printer data over TCP/IP. This is not an open standard. Physical Unit type within SNA. The software in an SNA node controlling the node's communications hardware. AXIS 5570e / AXIS 5670e User’s Manual...
Page 282 The SSCP is a NAU located on a host node in the network. Secure Sockets Layer, a protocol designed to provide secure communications on the Internet. Transmission Control Protocol. The connection-oriented, transport-level protocol used in the TCP/IP suite of protocols. AXIS 5570e / AXIS 5670e User’s Manual...
Page 283 NetBIOS names to dynamically assigned IP addresses. Wizard A special form of user assistance that automates a task through a dialog with the user. Wizards help the user to accomplish tasks that are complex and require experience. AXIS 5570e / AXIS 5670e User’s Manual Glossary...
Page 284: Index
AXIS AddPrinter Wizard......... 64 AXIS IPP Gateway Configuration ....... . . 103 AXIS LPR Gateway Configuration .
Page 285: Configuration Methods
Change Bonjour Service Name ........83 Changing Language in the Print Server’s Web Interface ....145 Character Set Conversion .
Page 286 Hex Transparancy ..........179 AXIS 5570e / AXIS 5670e User’s Manual...
Page 287 Installing AXIS ThinWizard ........
Page 288 AXIS Print Utility for OS/2 ........126...
Page 289 RISC ............282 AXIS 5570e / AXIS 5670e User’s Manual...
Page 290 Starting AXIS ThinWizard ........
Page 291 World Wide Web ..........188 AXIS 5570e / AXIS 5670e User’s Manual...

This manual is also suitable for:

5670e

Axis 5570e User Manual

Quick Links

Related Manuals for Axis 5570e

Summary of Contents for Axis 5570e

This manual is also suitable for:

Table of Contents