The Config File - Axis 540 User Manual

The Config File

--- GENERAL MENU
NODE_ADDR. : 00 40 8C 10 00 86
ROOT_PWD. : pass
USERS. :
BASE URL. : WWW.AXIS.COM
HP_JETADMIN. : YES (AUTO_SENSE, YES, NO)
S_ROUTE. : auto
AXIS 540/640 User's Manual
The remainder of this appendix contains the complete AXIS 540/640
parameter list. The left-hand column shows the parameters and their
default values as they appear in the config file, and the right column
contains brief descriptions of the parameters.
Most parameters will take effect in the print server for the next
incoming print job after being changed. However, those parameters
marked (Requires Restart), will require the print server to be restarted
before the new parameter setting can take effect. Restart is also
required when the Ring Speed Switch is changed on the AXIS 640.
Please note that the password relates to parameters, e.g. ROOT_PWD
and PROS_PWD will only be shown when logged in as root, i.e. not
when printing the parameters using the Test button.
Appendix B: The Parameter List
Node Address
Root Password
User Authority and Printer Access
Default Base URL Address ('+' and Token Ring models only)
HP JetAdmin Support Enabled
Token Ring Source Routing Mode (Only AXIS 640/642)
117