Axis 570 User Manual page 105

Apple
EtherTalk
Section 7: Setting Up - Macintosh
Using FTP
Notes:
104
To access the config file from a Macintosh you will need FTP support
such as MacTCP, Fetch or Anarchie. Follow the following procedure
below to modify the config file using MAC_FTP:
1. Start an FTP session using the command:
2. Login to the AXIS 570 MIO. Enter
password.
3. Upload the config file by typing the command:
4. Edit the file using your preferred text editor.
5. Down-load the edited config file to the AXIS 570 by typing the
command:
put config CONFIG
The method for performing file transfers using FTP varies,
depending upon which FTP application you are using.
In step 5, it is important that the edited filename is specified in
block capitals. Otherwise, the edits are regarded as temporary and
will be lost once the printer has been powered down.
ftp <host name>.
as user id and
root
get config
.
AXIS 570 MIO User's Manual
as
pass
.