Axis 570 User Manual page 69

SNA
Section 3: Setting Up - SNA
ASCII Printer Driver
Notes:
Updating parameters
68
This parameter should match the printer type you have connected to
your AXIS 570/670 MIO:
• ASCII printer driver
Name:
PRDRIVER
Description:
Value Printer
PCL5 printer
PCL5
PCL4 PCL4 printer
USER Editable Printer Driver.
If you wish to edit the control sequences within a printer driver,
the USER driver must be selected. See AXIS Network Print Server
Technical Reference for details.
This is most easily done when installing the AXIS 570/670 MIO using
the Installation Wizard in AXIS NetPilot™, which requires a
computer running Windows attached to your LAN.
Alternatively, you can do the setting up using FTP, or HTTP from a
Web browser, or using extended IBM printer emulation. To set
parameters using a web browser, you first need to assign an IP address
to the AXIS 570/670 MIO.
Using extended IBM printer emulation means setting up the AXIS
570/670 MIO by printing a file containing extended IBM emulation
commands to it after you have established communication with your
IBM host. The configuration is started by inserting the sequence
in your text. To protect your settings, a password must be
%CONFIG+
provided. By default, the password is
parameter values directly using the syntax shown below:
Syntax:
<Parameter name> = <value> [, <value>];
, Default:
PCL5
pass
AXIS 570/670 MIO User's Manual
. You may then set the