Integrating Your Axis 570/670 Mio Into The Os/2 Environment - Axis 570 User Manual

Integrating your AXIS 570/670 MIO into the OS/2 Environment

Create a Print Queue
(OS/2 version 1.x)
Create a Print Queue
(OS/2 version 2.x
and OS/2 Warp)
Share the Print
Queue
AXIS 570/670 MIO User's Manual
1. Double-click the Print Manager icon, click Setup, then select
Printers...
2. Click Add to make a new printer definition, then type a name of
your choice in the Name field.
3. Select \PIPE\<name>.MIO from the Device list, then select a
printer driver suitable for your printer.
4. Click Add, then click OK to confirm the printer definition.
5. Click Setup, then select Queues...
6. Click Add to create a print queue, and type a name in the Name
field.
7. Click Add, then click OK to confirm the queue definition.
1. Double-click the Templates folder, then drag the Printer icon out
to the Workplace Shell (or into a folder) while holding the right
mouse button down.
2. Type a name of your choice in the Name field.
3. Select \PIPE\<name>.MIO from the Port list, and select a printer
driver suitable for your printer from the Standard Printer list.
4. Click OK to confirm the printer definition.
A print queue must be made a shared resource before it can be accessed
from other computers (clients or other servers). Open an OS/2 window
and issue the following command:
NET SHARE <queue_name> /PRINT
Where <queue_name> is the name of the queue created above.
To share a printer resource when using OS/2 Warp with IBM Peer
service, follow the steps below:
1. Click the right mouse button on the printer object.
Section 6: Setting Up - OS/2
OS/2
95