Axis 570 User Manual page 31

Section 2: Basic Installation
Notes:
30
AXIS 670 Token Ring Print Server:
Start a DOS window. Type the following command:
arp -s 802.5 <Internet address> <node address>
ping <Internet address>
arp -d <Internet address>
Example:
arp -s 802.5 192.168.3.191 00-02-31-48-00-61
ping 192.168.3.191
arp -d <192.168.3.191>
The host will return Reply from 192.168.3.191... or
some similar message. This indicates that the address has been set
and the communication is established.
In the Windows 95 implementation of ARP you must first, if you
have an empty ARP table (seen with
unit on your network before setting the IP number of your AXIS
570/670 MIO.
Please note that when you execute the
time, you will experience a significantly longer response time than
is usual.
The command is advised so that the Internet to Ethernet
arp -d
address information is stored as a dynamic parameter within the
host's cache memory. Failure to execute this command will mean
that the mapping is static and consequently installed permanently
on the host.
), ping an existing
arp -a
command for the first
ping
AXIS 570/670 MIO User's Manual