Axis 570 User Manual page 11

AXIS 570/
Section 1: Introduction
670 MIO
NetWare
Environment
Windows
Environments
OS/2 Environments
UNIX Environment
10
AXIS NetPilot™ is the preferred utility for installing and integrating
the AXIS 570/670 MIO into a NetWare environment. The AXIS
570/670 MIO can be operated in both Print Server Mode and Remote
Printer Mode.
It is compatible with both NetWare 4.10 NDS and bindery
emulation, as well as NetWare 3.11, 3.12.
In Print Server Mode, the AXIS 570/670 MIO emulates a NetWare
Print Server, while in Remote Printer Mode it emulates a workstation
running RPRINTER or NPRINTER. Logical printers are supported
in both bindery and NDS modes for both PSERVER and NPRINTER.
The setup operation within a Windows environment may be
performed solely with the AXIS Print Utility for Windows, supplied
on the AXIS Utilities diskette.
Having installed the AXIS 570/670 MIO onto your network, the
AXIS Print Utility for Windows may then also be used to install and
maintain the print server ports as Windows ports. Windows 3.1,
Windows for Workgroups, Windows 95, and Windows NT are all
supported.
The setup operation in an OS/2 environment may be performed solely
with the supplied AXIS Print Utility for OS/2.
Use the AXIS Print Utility for OS/2 to install and integrate the
AXIS 570/670 MIO into the OS/2 spool system. The printers attached
to the AXIS 570/670 MIO will then appear to be directly connected to
the file server, and may be used by any client on your network.
You can use the AXIS 570/670 MIO as an integral part of your system,
so that the printers appear directly connected to the host print spool.
Use axinstall for the integration.
You can also operate the AXIS 570/670 MIO in an interactive mode to
print your host documents.
AXIS 570/670 MIO User's Manual