AXIS 5800+ Mobile AXIS 5800+ Mobile Quick Installation Guide BLUETOOTH™ is a trademark owned by its proprietor and used by Axis Communications AB under license...
Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice.
NetBIOS/NetBEUI and IPX/SPX, see the AXIS 5800+ User’s Manual, available from the AXIS Network Product CD and the Axis web site at www.axis.com. The instructions in this guide apply to AXIS 5800+ Mobile print servers with firmware version 6.30 and above.
1. Make sure that the printer is switched off and that the power supply is disconnected from the AXIS 5800+ Mobile. 2. Locate the serial number, found on the underside label of the AXIS 5800+, and write it down. Example: Ser. No. 00408C1802FB 3.
Example: If the serial number is 00408C1802FB, type AXIS1802FB and press Enter. • DHCP, RARP and BOOTP can be used to set the IP address in UNIX, see the AXIS 5800+ User’s Manual for details. If you are working in a network that does not use dynamic IP address assignment, refer to Manual IP •...
Server Home Page from the Server menu. Note: If your print server does not appear in the serial number list, refer to the online AXIS IP JumpStarter help files or the AXIS 5800+ User’s Manual which is available from the AXIS Network Product CD or...
Manual IP address assignment AXIS 5800+ Mobile Setting the IP address using ARP Refer to the appropriate section below to assign an IP address to your AXIS 5800+ using ARP: Windows 95, 98, NT, Me, 2000, XP Open a Command Prompt and enter the following syntax:...
Installing a printer in Mac OS X on page 12 Before you start: To establish communication with the TCP/IP network, you must assign an IP address to your AXIS 5800+ Mobile. Refer to Automatic IP address assignment on page 6.
Note: For peer-to-peer printing, AXIS Print Monitor must be installed on all printing clients, while it is only necessary to install it on the server for client-server printing. 1. Install the AXIS Print Monitor software which can be downloaded from the AXIS Network Product CD or from the Axis Communications web site at http://www.axis.com...
Axis print server will appear as though it is directly connected to the host print spooler. If you want to integrate your AXIS 5800+ Mobile into your host spooler, you can use the Axis installation script axinstall, or perform a manual integration.
(Mac OS X). Note: For installation descriptions on older versions Mac OS, refer to the AXIS 5800+ User’s Manual which is available from the AXIS Product CD or the Axis web site at http://www.axis.com 1. Select Print Center from the Applications | Utilities folder.
AXIS NetPilot OS/2 Note: Please refer to the AXIS 5800+ Mobile User’s Manual for a comprehensive description of the supported configuration and management tools. Using a Standard Web Browser Axis print servers have built-in web pages that can be accessed via a standard web browser.
1. Start a Web browser from a client in your network. 2. Enter the IP address or the host name of the server, where you installed AXIS ThinWizard. 3. Enter the user id and the password and click the Log in button.
Windows 98SE, Me, NT4 (service pack 6), 2000 (service pack 2), XP See AXIS Wireless Printing Utility on page 16 for more information. Other Platforms The AXIS 5800+ Mobile supports all clients supporting any of the Bluetooth printing profiles (HCRP, OPP, SPP, APP) listed below. Bluetooth The AXIS 5800+ Mobile complies with Bluetooth version 1.1...
All Axis software and upgrades are available free of charge from the AXIS Product CD or from the Axis web site at www.axis.com Note: As the AXIS 5800+ Mobile supports SPP (Serial Port Profile), you can also send a print job using any standard SPP client. AXIS Wireless Printing Utility AXIS Wireless Printing Utility is a software tool for locating and printing to Axis wireless print servers.
The print server’s Administrator can assign new names to the items displayed under "Name" by logging into the print server: admin | This Print Server | General | Print Server Name. Note: As the AXIS 5800+ Mobile supports SPP (Serial Port Profile), you can also send a print job using any standard SPP client.
Wireless Printing from an Ericsson Mobile Phone AXIS 5800+ Mobile Wireless Printing from an Ericsson Mobile Phone Hardware requirements Bluetooth • Ericsson mobile phone equipped with ™ Wireless Technology e.g. Ericsson R520, Ericsson T68, Ericsson T39 Printer Port • Use the print server’s LPT1 port on a PCL4 printer for wireless printing from...
PCL4 printer. • When printing from a mobile phone, make sure that the printer is connected to the AXIS 5800+ Mobile LPT1 port. Refer to Connecting the Hardware on page 5 for information on the location of the LPT1 port on the print server.
Resetting the Print Server AXIS 5800+ Mobile Resetting the Print Server Follow the instructions below to reset the AXIS 5800+ parameters to the default values (Factory Default): Important: A Factory Default will reset the internal settings of the print server to default and should be performed with caution.
• Safe flash loading - the AXIS 5800+ Mobile is equipped with 8 MB RAM, thus allowing a new version of firmware to be downloaded and stored in the memory before the old firm- ware version is deleted.
Need help?
Do you have a question about the 5800+ Mobile and is the answer not in the manual?
Questions and answers