Axis 570 User Manual page 16

AXIS 670 MIO Physical Description
Test Button
Ring Speed Jumper
Network Indicator
AXIS 570/670 MIO User's Manual
Ring Speed Jumper
Test Button
Network Indicator
Token Ring
UTP connector
Token Ring
STP connector
The test button is used for:
• Printing a test page to check the connection to the printer.
• Printing the parameter list showing all the AXIS 670 MIO
settings.
• Resetting the AXIS 670 MIO parameters to the factory default
settings.
Refer to Appendix A - The Test Button for more information about
printing and resetting the parameters.
This jumper is set to match your network speed. The jumper (S4) is
located on the printed circuit board. With the jumper in place, the
network speed is 16 Mbit/s. Remove the jumper to select 4 Mbit/s.
This flashes to indicate network activity.
Section 2: Basic Installation
Flash Loading Port
15