Axis 570 User Manual page 51

SNA
Section 3: Setting Up - SNA
Creation of
RWS-controller
50
To create a RWS controller description, type CRTCTLRWS. Set your
choices in the panel:
• Controller description: Select the name you want for the controller.
• Controller type: select 5494.
• Controller model: Select 2.
• Link type: Select *NONE to indicate LU 6.2 attachment.
• Remote Location: Select the remote location name for the
controller. This value is used to correlate the RWS controller with a
specific APPC controller. This value must match the Print Server
Parameter LU_NAME. Refer to the AXIS 570/670 MIO Set-up
section for the default value. The default is the same as for the
parameter CP_NAME.
• Local location: Select the local location name for this controller.
The local location must match the AS/400 LU name and the Print
Server Parameter H1_LU_NAME. To display the network
attributes, type DSPNETA.
• Remote network identifier: This parameter is the remote network
ID where the Print Server is located. This value must match the
setting of the Print Server Parameter NWORK_NAME. The
default is APPN.
• Autocreate device: In OS/400 Version 3 Release 1 or later, select
*ALL if you would like device descriptions automatically created
for this controller. Otherwise, select *NONE.
• Switched disconnect: In OS/400 Version 3 Release 1 or later, select
*YES if you would like this controller disconnected when the
system determines that the last device is no longer in use.
Otherwise, select *NO.
AXIS 570/670 MIO User's Manual