Error Conditions; User Errors; Invalid User Entry; No Signal - Christie Roadster User Manual

Operation
3.13 Error
Conditions
User Errors 
Input Signal Errors 
3-78
The default login provides access to security settings, where you can define other
users with the same or fewer rights. Use "unlimited" rights for most applications. For
all logins, the Service menu is still protected with its own password.
NOTES: 1) Any proxy server settings that interfere with this type of link should be
disabled for using ChristieNET. Disable through Internet Explorer's < Tools>
<Internet Options> <Connections> <LAN Settings>. 2) Your PC must be Java-
enabled to v1.4.2 or higher to run ChristieNET. 3) Depending on your projector
model, certain controls provided through ChristieNET are non-functional.
Occasionally the projector will encounter an error condition that can interrupt normal
operation. Such a condition can be caused by a simple invalid keypad entry, an input
signal error (most common) or a system error. The manner in which users are to be
notified of error conditions is set in the Menu Preferences menu:

To see error messages displayed on-screen, select the "

To be notified via a serial communication only, select the "

To receive both types of notifications, select "

To disable error messages (except for "invalid user key entry", which can't be
hidden), select " ".
Off
Note that status/error messages also appear in the LCD Status Display window above
the keypad at the rear of the projector. They are accompanied by their corresponding
two-digit error code next to the keypad, evident at a greater distance. Normal
operation is indicated by the "00"status code.

Invalid User Entry

A keypad entry not recognized by the projector triggers a short on-screen error
message identifying the problem. For example, if you specify a channel number that
is not available, the message "Invalid Channel will appear. Or if you try to enter the
wrong password, you'll see "Invalid Password". Press
message and try again.
NOTE: On-screen display of "Invalid User Entry" messages cannot be disabled,
even if Display Error Messages has been set to "Off".
An input signal error message occurs if you are in presentation level (i.e., there are no
menus present) and have selected an input on which the projector detects a problem.
While menus remain operational and any key press will temporarily remove any
displayed error message, you must resolve the signal problem in order to permanently
eliminate the message.

No Signal

The message "No signal" occurs when there is no source signal detected at the
selected input—both HSYNC and VSYNC are inactive and the screen background is
black. Connect or correct the signal, or try another input.
Screen
RS-232
".
All
or
Exit
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
" option
" option.
to clear the
020-100002-05 Rev. 1 (02-2010)