Align The Edges Of The Grid; Secure All Stacking Wheels And Leg Nuts - Christie Roadster User Manual

Installation & Setup
STEP 6 
STEP 7 
STEP 8 
Installation Type 
2-12

Align the edges of the grid

With centerlines aligned, adjust zoom (top projector) to align the edges of its image
with the other image. Then adjust focus. When aligned, all lines from the combined
red/green grids will be yellow.

Secure all stacking wheels and leg nuts

WARNING
Critical Safety Procedure.

Turn all three stacking wheels until they are
firmly secure against the rest of the stacking
mount (Figure 2.16).

Secure both two rear leg nuts against the
bottom of the projector.
Repeat steps 1 to 7 for a third projector
Choose the installation type that suits your needs: front or rear screen, floor mount or
inverted mount.
ADVANTAGES

Easy to set up

Can be moved or changed quickly

Easy to access
Front Screen, Inverted Mount (ceiling) Installation
ADVANTAGES
 Does not take up audience space
 Projector is unobtrusive
 Projector cannot be accidentally moved
Rear Screen, Floor Mount Installation
ADVANTAGES

Projector is completely hidden

Projector is easily accessed

Usually good ambient light rejection
Rear Screen, Inverted Mount (ceiling) Installation
ADVANTAGES
 Projector is completely hidden
 Usually good ambient light rejection
Rear Screen, Floor Mount with Mirror
ADVANTAGES

Projector is completely hidden

Usually good ambient light rejection

Requires less space behind screen than other
rear screen installations
Figure 2.16. Secure All
Hardware
CONSIDERATIONS

Shares floor space with audience
CONSIDERATIONS
 Installation is more permanent
 It is more difficult to access the projector
CONSIDERATIONS

Requires separate room

Installation cost is usually higher
CONSIDERATIONS
 Requires separate room
 Installation cost is usually higher
CONSIDERATIONS

Requires separate room

Installation cost is usually higher
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)