Arrow Keys; Laser; Backlighting - Christie Roadster User Manual

, ,
Focus Zoom L ens H
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)
NOTE: The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. Refer to 2.11 Keypad Protocols and
Conversion, and 3.7, Adjusting System Parameters and Advanced Controls.
Enter
Press to select a highlighted item, to toggle a checkbox, or to accept a parameter
adjustment and return to the previous menu or image.
Exit
Exit
Press to return to the previous level, such as the previous menu.
Exit
NOTE:
does not save changes within text editing boxes (including number
Exit
editing of a slidebar value) or within pull-down lists. It acts as a "cancel" in these
cases.

Arrow Keys

Use the
within a pull-down list without having to first scroll through options. These keys also
jump to the next page in long menus. Refer to Editing Text later in Section 3.
Use the
combination with power, shutter and OSD keys to force the corresponding state. See
details provided on the back of the remote keypad.
Lens Focus, Zoom and Lens H, Lens V
,
L ens V
Use , ,
Focus Zoom
the lens for optical sharpness, size, and position. Note the
NOTES: 1) The
in keypad is the same as using the
"Brick" rental staging – Standard IR Remote, use the three lens keys with the arrow
keys.

Laser

NOTE: Not available on the "Brick" rental staging – Standard IR Remote.
Press to activate the laser pointer, and direct the remote at the screen to
highlight an area with a light beam (dot). The closer you are to the screen the brighter
the laser beam appears. The laser pointer works best with reduced ambient lighting.

Backlighting

NOTE: "Brick" rental staging – Standard IR Remote only.
Press the "light bulb" key to illuminate the keys on the remote without sending a
command to the projector.
keys to change a slidebar value or to select a different option
keys to navigate within a menu, pull-down list or text box. Use in
, and Lens with their corresponding arrow keys to adjust
L ens H L ens V
S hift
Lens key, when combined with
S hift
and
L ens V
requires a zoom lens.
Zoom
keys on the built-
keys on the remote. 2) On the
L ens H
Operation
3-13