Adjusting The Image; Next Channel; Use Auto Setup; Size And Position Menu - Christie Roadster User Manual

3.6 Adjusting the
Image
Before You Begin 
Size and Position Menu 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)

Select this option to see or change Channel Edit settings for the

NEXT CHANNEL:

next channel in the Channel Setup list.
The most commonly used options for image adjustments are accessed through two
menus: Size and Position (
appear in the Main menu. From either of these two menus, you can change settings
affecting the image from the current channel by working with the appropriate
slidebars, checkboxes and pull-down lists.
the presentation, if from the Main menu) and accept any changes you may have
entered. Settings are saved with the current channel.
From your presentation, you can access any of the individual options in these menus
by pressing followed by the appropriate two-digit number representing their
Menu
location in the menu system. For example, press
"Gamma" option in the Image Settings menu.
Note that for certain options, you may prefer to use a "direct key" from presentation
level to go directly to a particular option without traveling through the menu system
(available for certain display parameters only). For example, press
"contrast" slidebar immediately. Press
NOTES: 1) To hide these "direct" slidebars, disable the" Display Slidebars"
checkbox in the Menu Preferences menu. 2) To hide the entire menu system from
view, turn off the on-screen display by pressing

Use Auto Setup (

Aut o
Set up
For a good and efficient first step in perfecting the image, press
an automated process in which the projector quickly optimizes critical display
parameters for unlocked channels such as size, position, pixel tracking, etc., based on
the type of incoming source data detected. An Auto Setup can save considerable setup
time, and you can still modify the adjustments as desired using menu options
described below.
In the Size and Position menu, you
can increase or decrease the size of
your main image, change its
proportion (aspect ratio), move the
image to a specific area of the
screen, and refine other related
parameters. Use Size and Position
controls to match the image
precisely to the screen used at the
site.
Refer to "Using Slidebars and Other Controls" (earlier in this section) if you need
help using any of the options and controls. Changes made in the Size and Position
menu are applied immediately and are saved when you exit the menu (press
).
Menu
) and Image Settings (
Menu
will return to the previous menu (or to
Exit
to return to your presentation.
Exit
)
1. Resize Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. H-Position
7. V-Position
8. Keep Aspect on Auto Setup
Blanking
9.
), both of which
Menu
to quickly access the
2 3
Menu
to access the
Cont
.
OS D
. This initiates
Aut o
Set up
Size and Position
No Resizing
1.000
1.000
858
0
360
262
Operation
or
Exit
3-23