Resize Presets; Select A Resize Presets; What Is The Resizing Default? - Christie Roadster User Manual

Roadster, matrix wu, mirage s+/hd/wu series
Hide thumbs Also See for Roadster:
Table of Contents

Advertisement

Operation
3-24

Resize Presets

NOTE: The same resize presets are available to all HD widescreen models. Please
note, the graphics used to describe each preset in this section are of the SXGA+
models only.

Select a Resize Presets

option to quickly display an
image in its native resolution
or to automatically resize an
image to closely fill the
projector's native resolution
of 1400 x 1050, or to
optimize the width or height
of your display. Size,
Position and Blanking
parameters will
automatically adjust accordingly. Or, if Blanking is set first, which defines an Active
Input Area; Resize Preset scaling will occur in this region of interest only. Resizing
options are explained in detail below.

WHAT IS THE RESIZING DEFAULT?

image will utilize as much of the projector's display area (1400 x 1050) as possible
for the type of incoming source data. See Select "Default" below.
WHEN "CUSTOM" APPEARS:
in the Size and Position menu when any of the values for Size, Vertical Stretch, H-
Position, V-Position or Blanking do not correspond to those for a preset. It is not a
choice in the Resize Presets pull-down list.
 Select
for most sources (factory default). The image will be centered
"DEFAULT"
and displayed as large as possible depending on the type of source, as described
below:
A 5:4 graphic image will enlarge to fill the screen height, and be centered
between narrow black sidebars.
A video image or 4:3 graphic image will enlarge to fill the screen width.
An HDTV (16:9) image will fill the width and be centered between black bars
on top and bottom.
 Select
"NO RESIZING"
smaller than the projector's 1400 x 1050 resolution. For example, for a source with
a native resolution of 800 x 600, "No Resizing" will center a small image within a
black border—the black border areas are unused areas. See below.
By default when displaying a new source, your
The "Custom" re-size descriptor automatically appears
to display the image in its native resolution, which may be
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents