Keypad Protocols And Conversion; Zoom; Focus; Lens Offset - Christie Roadster User Manual

Installation & Setup
Zoom 
Focus 
Lens Offset 
2.11 Keypad
Protocols and
Conversion
2-30
With the input image displayed:

If remote keypad: Press Zoom

If built-in keypad: Press Zoom
Hold the key down to see the effect –arrows in the display
indicate the direction of the zoom (Figure 2.39).
With the input image displayed:

If remote keypad: Press Focus

If built-in keypad: Press Focus
Hold the key down to see the effect – arrows in the display indicate the direction
of the focus (Figure 2.40).
To move the image:

If remote keypad: Press either Lens H
Lens V

If built-in keypad: Press
keys.
Both styles of remote IR keypads—ergonomic or "Brick"
rental staging – Standard IR Remote —can be converted to a
wired remote by adding the appropriate cable (provided). This
is most useful for simple applications in which it is
impractical to communicate via IR, such as when the projector
is in another room and cannot respond to an IR signal, or
when you wish to connect to and control individual projectors
within a group.
To control the projector when signals from a remote keypad cannot reach the
projector, use the projector's built-in keypad. The nearby LED display provides
feedback indicating current status and activities of the projector. Because the built-in
keypad has fewer keys than the remote keypad, certain projector functions are
accessible only through the menu system rather than via a direct key.
NOTE: The built-in keypad cannot be disabled
or
or
or
or
(Figure 2.41).
and use the arrow
Lens
Shif t
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
.
.
Figure 2.39
.
Figure 2.40
.
or
Figure 2.401
Sample Keypad
Cable
020-100002-05 Rev. 1 (02-2010)