Select A Source; Optimize The Display; Lens Adjustments; Image Adjustments - Christie Roadster User Manual

STEP 6 
STEP 7 
STEP 8 
Step 9 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)

Select a Source

Using either keypad, press
the image for the source you connected in Step 3. The display will resize as needed
and produce largest possible image for the type of source present. NOTE: Refer to
Menu Tree, Appendix E, this allows you to quickly navigate to a specific menu, and
associated options/secondary menus.

Optimize the Display

Press Aut o on the built-in keypad (or
Set up
automated process in which the projector optimizes critical display parameters such as
size, position, pixel tracking, etc., for the current source. Auto Setup can save time in
perfecting a display and you can modify the adjustments later as desired. Refer to Section
3.

Lens Adjustments


: With the input image displayed:
ZOOM

If remote keypad: Press Zoom

If built-in keypad: Press Zoom
Hold the key down to see the effect – arrows in the display indicate
the direction of the zoom (Figure 2.2).

With the input image displayed:
FOCUS:

If remote keypad: Press Focus

If built-in keypad: Press Focus
Hold the key down to see the effect – arrows in the display indicate
the direction of the focus (Figure 2.3).

To move the image:
LENS OFFSET:

If remote keypad: Press either Lens H
(Figure 2.4).

If built-in keypad: Press

Image Adjustments

Press or (remote) to access display parameters described in Section 3.
Menu
, , ,
,
Input 1 Input 2 Input 3 Input 4 Input 5
on the remote keypad) to initiate an
.
or
.
or
or
or
and use the arrow keys.
Lens
Shif t
Installation & Setup
, or
to select and display
Input 6
.
.
or Lens V
Figure 2.4
Figure
2.2
Figure
2.3
2-3