Tilting The Projector; Ceiling Mount; Vertical And Horizontal Tilt Ranges; Rear Screen - Christie Roadster User Manual

Installation & Setup
Tilting the Projector 
Folded Optics 
2.4 Connecting
Sources
2-18
- The projector can also be inverted and suspended from the ceiling

CEILING MOUNT

using a specially designed ceiling mount fixture. This type of mounting is
recommended for fixed installations and for those that want the projector out of plain
view or have a limited amount of space for projector and audience. For more
information, contact your dealer.
Use only the CHRISTIE approved ceiling mount kit designed for your
projector. Refer to the installation instructions and safety guidelines
provided in the kit.
The projector can be rotated and mounted at any vertical angle—i.e., you can tilt the
face of the projector up or down as much as desired for your installation. Side-to-side
tilt, however, must not exceed 15° (Figure 2.21). Keeping the projector fairly level in
this manner ensures that the lamp axis is level, and is required for safe and reliable
lamp operation. Always vent exhaust air away from the lens.
Figure 2.21. Vertical and Horizontal Tilt Ranges
In rear screen applications (Figure 2.22) where space
behind the projector is limited, a mirror may be used
to fold the optical path. The position of the projector
and mirror must be accurately set. Consult your
dealer or Christie for details.
Sources connect to the Input Panel located on the rear of the projector. As shown in
Figure 2.23.
The upper right corner (
INPUT 1
analog RGB source, or it can also be used for YPbPr signals or additional video
sources. Just beside these BNCs, the DVI-I connector (
analog display signals from a computer. Connect analog composite video at
or S-video at from devices such as VCRs, laser disc players or DVD players.
INPUT 4
) typically accepts an RGB signal from an external
INPUT 2
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
Figure 2.22. Rear Screen
) accepts digital or
INPUT 3
020-100002-05 Rev. 1 (02-2010)