Abbreviations For Signal Type; Signal Type - Christie Roadster User Manual

Operation
What Channels 
Are Defined So Far?
3-20
All available channels are listed in the Channel Setup menu (Figure 3.10), which
describes how each channel can be accessed and which serves as the gateway for
editing, copying and deleting channels.
From the presentation level
press to display the
Menu
Main menu. To display the
Channel Setup menu, press
, or move the highlight
to the Channel Setup
option and press . The
Enter
Channel Setup menu will
appear (see sample at
right), with the active
channel highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU?
far and indicates where they connect on the projector's rear input panel. The far left
column lists channel numbers currently defined. The
values in the far right columns indicate horizontal and
vertical frequencies—if a user has defined a name for
this channel, it appears here instead. Remaining
columns contain details pertaining to each channel
setup, such as its switcher number (always 0 = projector), slot location (01-08), a
variety of icons indicating access to each channel, and an abbreviated description of
each signal type. Refer to Editing a Channel Setup for details.
NOTE: If you have more than a handful of channels, use
remaining channels not visible in the initial display of channels.
Either channel list, whether the
SIGNAL TYPE —
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an "i" (interlaced signals) or "p" (progressive
signal"). See Table 3.2.
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
Figure 3.10. All Channels Appear in the
Channel Setup Menu
This menu lists all channels defined so
key list or the Channel Setup
Chan

Signal Type

Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Video
Composite Video
Digital
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
and to see the
020-100002-05 Rev. 1 (02-2010)