Navigate Within The Edit Window; Add Or Delete A Character Or Space; Editing Numerical Values; Using Inputs And Channels - Christie Roadster User Manual

Editing Numerical Values 
3.5 Using Inputs
and Channels
Do I Select an Input 
Or a Channel?
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)

NAVIGATE WITHIN THE EDIT WINDOW:

to move the cursor backwards as desired.
Figure 3.9. Entering Text

ADD OR DELETE A CHARACTER OR SPACE:

press . To delete a highlighted character (or space), press
Func
PRESS (ENTER) WHEN FINISHED:
press (Enter).
NOTE: Press at any time to cancel changes and return to the previously defined text.
Exit
Enter numbers directly from the keypad in order to specify numbers representing
projectors, channels (source setups), or slots. As each digit is entered, it is displayed
and the cursor moves on. Note that channel numbers are defined with two digits—for
example, if you enter only a single digit (such as "7") for a channel number, the
channel will automatically be defined as "07". Enter "07" to utilize this channel.
NOTES: 1) Once you enter the first digit, this digit replaces all old digits. 2) If you
press any non-numbered key, the number entered up to that point is accepted and
updated as the new value. 3) Press
NOTE: Refer to Section 2, Installation and Setup, for a full explanation of how to
connect sources to the projector.
The projector stores and automatically recalls up to 50 different channels (source
setups) for a variety of inputs. This memory feature allows you to define and
conveniently use a wide variety of customized setups rather than having to repeatedly
re-configure the projector for different presentations. Depending on what you have
defined, each physical source connection (i.e., input at the projector) can have several
different channels associated with it.
An input is a source physically connected at the projector.
INPUT –
source signal according to which input slot it is connected.
Press to move the cursor forward or
To edit a highlighted
EDIT A CHARACTER:
character, use and
the alphabet, numbers, spaces and punctuation
available. When the character you need
appears, press to select it—the cursor
will move to the next character of current text,
if present. Note that you can also enter a
number directly from the keypad—it will be
accepted and the cursor will move on.
To insert a space at the cursor location,
To accept edits and leave the edit window,
to cancel editing of numerical values.
Exit
Operation
to scroll through
.
Func
describes the
Input
3-17