Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Converting a tower model to a rack model
15.3

Concluding steps

"Installing the top cover" on page 64
Ê
Figure 295: Attaching the caution label
Ê Attach the caution label on the left front edge of the top cover as shown.
Ê Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
The document is available online.
Ê Mount the server in the rack as described in section
the rack" on page
Ê Reconnect all external cables.
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
Ê Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page
388
65.
101.
Upgrade and Maintenance Manual
"Mounting the server in
"Using the Chassis ID
104".
TX2540 M1