7.2.8.3
Installing the new SAS backplane
Figure 74: Installing the 2.5-inch HDD SAS backplane
Ê At a slight angle, fit the SAS backplane into the two guides on the HDD cage
(1).
Ê Fold down the SAS backplane (2).
Ê Secure the SAS backplane with the two screws (see figure 72).
Ê Connect the power cable and the SAS cable to the SAS backplane (see
figure 72).
7.2.8.4
Concluding steps
"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Installing a 2.5-inch HDD / SSD module" on page 143
Ê
inch HDD / SSD dummy module" on page
I
For detailed information on HDD mounting order, refer to section
inch HDD / SSD configurations" on page
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
TX2540 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
147.
135.
and
"Installing a 2.5-
"2.5-
151