Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual page 396

Cabling
I
Replacing the intrusion switch cable is illustrated by the example of
the 2.5-inch HDD model. In case of the 3.5-inch HDD model, the
procedure is identical, although the HDD bay top cover looks slightly
different.
Figure 304: Intrusion switch holder in 3.5-inch HDD configurations
Figure 305: Removing the intrusion switch cable (B)
Ê Slide back the intrusion switch holder until it disengages from the HDD bay
top cover (1).
Ê Remove the defective intrusion switch holder (2).
396 Upgrade and Maintenance Manual
TX2540 M1