12.3.2 Removing an accessible drive
Ê Remove all cables from the accessible drive see section
page
391.
Ê Press out on the locking latch to disengage the accessible drive locking bar
(see figure 213).
Ê Fold up the accessible drive locking bar.
Figure 216: Removing the accessible drive
Ê Carefully pull the accessible drive out of its installation bay (1).
Ê Close the locking bar (2) until it locks in place (3).
12.3.3 Installing accessible drive dummy covers
Ê If applicable, install the accessible dummy covers for the desired accessible
drive bay as described in section
on page
188.
TX2540 M1
"Installing accessible drive dummy covers"
Upgrade and Maintenance Manual
Accessible drives and LSD
"Cabling plans" on
301