Concluding Steps; Removing Expansion Cards; Preliminary Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Ê If applicable, install SFP+ transceiver modules to the expansion card as
described in sections
Ê If applicable, connect a BBU or FBU to the expansion card as described in
sections "Installing a BBU" on page 240
9.4.1.4

Concluding steps

"Reassembling" on page 62
Ê
Ê Reconnect all external cables to the replaced expansion card.
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
"Updating RAID controller firmware" on page 88
Ê
Ê If applicable, "Enabling Option ROM scan" on page 89
"Enabling SVOM boot watchdog functionality" on page 93
Ê
"Enabling BitLocker functionality" on page 98
Ê
Ê If applicable,"After replacing / upgrading LAN controllers" on page 103
9.4.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools: tool-less
9.4.2.1

Preliminary steps

"Disabling BitLocker functionality" on page 77
Ê
"Shutting down the server" on page 48
Ê
Ê Remove all external cables from the expansion card to be removed.
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
TX2540 M1
"Installing SFP+ transceiver modules" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
or "Installing an FBU" on page
.
Hardware: 5 minutes
221.
245.
231