Preliminary Steps; Removing The Defective Fbu; Installing The New Fbu; Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

9.5.7.1

Preliminary steps

"Locating the defective server" on page 45
Ê
"Disabling SVOM boot watchdog functionality" on page 78
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
9.5.7.2

Removing the defective FBU

Ê Remove the FBU as described in section
9.5.7.3

Installing the new FBU

Ê Install the FBU as described in section
9.5.7.4

Concluding steps

"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
Ê If applicable, "Updating RAID controller firmware" on page 88
"Enabling SVOM boot watchdog functionality" on page 93
Ê
TX2540 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing the FBU" on page
"Installing the FBU" on page
253.
246.
257