Removing Processor Heat Sinks - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Server primergy tx2540 m1

Hide thumbs Also See for PRIMERGY TX2540 M1:

Table of Contents

11.5.3 Removing processor heat sinks

Figure 202: Removing the processor heat sink

Ê Loosen the four captive screws on the heat sink in a crossover pattern (1-4).

Ê Carefully turn the heat sink back and forth to detach it from the processor.

This may be necessary due to the adhesive quality of the thermal

paste located between the heat sink and processor.

Pay special attention not to damage any system board components

surrounding the processor socket.

Ê Lift the heat sink out of the chassis.

Ê Thoroughly clean residual thermal paste from the surface of the heat sink

and the processor using a lint-free cloth.

Upgrade and Maintenance Manual