Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 105: Installing the 3.5-inch HDD bay top cover (C)
Ê Secure the HDD bay top cover to the chassis with five screws (see blue
arrows).
Ê Secure the intrusion switch holder on the HDD bay top cover with one screw
(see orange arrow).
Ê Connect the cables to the SAS backplane (see figure 97).
7.3.7.4

Concluding steps

"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
"Installing a 3.5-inch HDD module" on page 166
Ê
HDD dummy module" on page
I
For detailed information on HDD mounting order, refer to section
inch HDD configurations" on page
176
169.
Upgrade and Maintenance Manual
and "Installing a 3.5-inch
161.
"3.5-
TX2540 M1