Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Figure 268: Securing the TPM
Ê Secure the TPM with the TPM screw using the TPM bit insert.
I
Do not fasten the screw too firmly. Stop as soon as the head of the
screw lightly touches the TPM.

14.4.1.3 Concluding steps

"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the corresponding BIOS Setup Utility reference
manual.
"Switching on the server" on page 73
Ê
"Enabling BitLocker functionality" on page
Ê
TX2540 M1
Upgrade and Maintenance Manual
System board and components
98.
351