Installing The New System Board - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

System board and components

14.6.3 Installing the new system board

G
Figure 278: Installing the system board (A)
Ê Hold the system board by the memory module ejectors and a PCI slot.
V
CAUTION!
– Do not lift or handle the system board by any of its heat sinks!
– Ensure not to damage the EMI springs to comply with applicable
EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê At a slight angle, lower the system board into the chassis. Make sure that
the system board is shifted under the cable guide (G) before you lower it
down.
368 Upgrade and Maintenance Manual
TX2540 M1