Expansion cards and backup units
9.4.2.2
Removing an expansion card
Ê If applicable, disconnect internal cables from the expansion card.
Ê If applicable, remove SFP+ transceiver modules
"Removing an SFP+
transceiver module" on page
224.
Figure 160: Removing the expansion card (A)
Ê Fold up the locking handle on the slot bracket clamp (1, see close-up).
Ê Press down on the slot bracket clamp to disengage it (2, see close-up).
Ê Remove the slot bracket clamp (3).
232
Upgrade and Maintenance Manual
TX2540 M1