7.2.7.2
Removing a 2.5-inch HDD / SSD module
Ê Remove the HDD / SSD module to be replaced from the server as described
in section
"Removing a 2.5-inch HDD / SSD module" on page
7.2.7.3
Installing a 2.5-inch HDD / SSD module
Ê Install the new HDD / SSD module into the empty drive bay as described in
section
"Installing 2.5-inch HDD / SSD modules" on page
7.2.7.4
Concluding steps
"Installing accessible drive and HDD bay covers" on page 69
Ê
"Performing a RAID array rebuild" on page 99
Ê
7.2.8
Replacing a 2.5-inch HDD SAS backplane
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.2.8.1
Preliminary steps
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
"Removing the system fan holder" on page 74
Ê
"Removing 2.5-inch HDD / SSD modules" on page 145
Ê
TX2540 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Hardware: 15 minutes
146.
142.
149