Removing A 3.5-Inch Hdd Module; Installing A 3.5-Inch Hdd Module; Concluding Steps; Replacing A 3.5-Inch Hdd Sas Backplane - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual
Server primergy tx2540 m1
Hide thumbs
Also See for PRIMERGY TX2540 M1:
- Upgrade and maintenance manual (422 pages) ,
- Operating manual (92 pages)
Table of Contents
Advertisement
7.3.6.2
Removing a 3.5-inch HDD module
Ê Remove the HDD module to be replaced from the server as described in
section
"Removing a 3.5-inch HDD module" on page
7.3.6.3
Installing a 3.5-inch HDD module
Ê Install the new HDD module into the empty drive bay as described in section
"Installing 3.5-inch HDD modules" on page
7.3.6.4
Concluding steps
"Installing accessible drive and HDD bay covers" on page 69
Ê
"Performing a RAID array rebuild" on page 99
Ê
7.3.7
Replacing a 3.5-inch HDD SAS backplane
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.3.7.1
Preliminary steps
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
"Removing the system fan holder" on page 74
Ê
"Removing 3.5-inch HDD modules" on page 167
Ê
TX2540 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
168.
164.
Hardware: 15 minutes
171
Advertisement
Table of Contents
