Adjusting Toner Darkness; Canceling A Print Job - Lexmark 6500e User Manual

Printing
Printing a directory list
A directory list shows the resources stored in a flash memory or on the printer hard disk.
From the home screen, navigate to:
> Reports > Print Directory
Printing print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and
2 ABC
3
Release the buttons when the screen with the progress bar appears.
The printer performs a power‑on sequence, and then the Configuration menu appears.
4
Touch Print Quality Pages Menu > Print Quality Pages.
5
Touch Exit Config Menu to return to the home screen.

Adjusting toner darkness

1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can::
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Network/Ports menu.
• Print a network setup page or menu settings page, and then locate the information in the TCP/IP section.
2
Click Settings > Print Settings > Quality Menu > Toner Darkness.
3
Adjust the toner darkness setting.
4
Click Submit.

Canceling a print job

Canceling a print job from the scanner control panel
1
From the scanner control panel, touch Cancel Jobs or press
2
Touch the print job you want to cancel, and then touch Delete Selected Jobs.
Note: If you press
while turning the printer on.
6 MNO
on the keypad, then touch Resume to return to the home screen.
on the keypad.
97