Remote Operator Panel - Lexmark 6500e User Manual

Customizing the home screen
My MFP
For detailed information about configuring and using My MFP, visit the Lexmark Web site at
http://support.lexmark.com.
Icon Description
The application lets you customize your touch‑screen settings and store those preferences on a flash
drive. Each time you want to copy, fax, or scan, insert the flash drive into the USB port of the printer. All
your personal preferences are automatically loaded, including job settings, home screen preferences,
and address book.
Note: The icon appears only when a flash drive with My MFP settings is inserted into the USB port of
the printer.
To activate My MFP, insert a flash drive into the USB port of the printer, and then follow the instructions on the scanner
display to run the setup wizard.
To use My MFP, insert the flash drive into the USB port of the printer whenever you want to copy, fax, or scan.
WS‑Scan
Icon Description
The Web Services‑Scan application lets you scan documents at the printer, and then send the scanned
image to your computer. WS‑Scan is a Microsoft application that is similar to Scan to Network, but has
the capability of sending the scanned document to a Windows‑based application. To learn more about
WS‑Scan, refer to the Microsoft documentation.
Note: The icon appears on the scanner home screen only when there is a computer registered with
the network printer. The computer must have either Windows 8, Windows 7, or Windows Vista
operating system installed.

Remote Operator Panel

This application shows the scanner control panel on your computer screen and lets you interact with the scanner control
panel, even when you are not physically near the printer. From your computer screen, you can view the printer status,
release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at
the printer.
To activate Remote Operator Panel, do the following:
1
From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF) > Remote Operator Panel.
2
Select the Enabled check box, and then customize the settings.
3
Click Apply.
To use Remote Operator Panel, from the Embedded Web Server, click Applications > Remote Operator Panel > Launch
VNC Applet.
21