Lexmark 6500e User Manual page 166

Understanding printer menus
Menu item
USB Buffer
Auto
3KB to [maximum size allowed]
Disabled
Job Buffering
Off
On
Auto
Mac Binary PS
Auto
On
Off
ENA Address
yyy.yyy.yyy.yyy
ENA Netmask
yyy.yyy.yyy.yyy
ENA Gateway
yyy.yyy.yyy.yyy
Description
Sets the size of the USB input buffer
Notes:
•
Auto is the factory default setting.
•
Disabled turns off job buffering. Any jobs already buffered on the scanner hard
disk are printed before normal processing resumes.
•
The USB buffer size value can be changed in 1-KB increments.
•
The maximum size allowed depends on the amount of memory in the scanner,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
•
To increase the maximum size range for the USB Buffer, disable or reduce the
size of the parallel, serial, and network buffers.
•
Changing this setting from the scanner control panel and then exiting the
menus causes the scanner to restart. The menu selection is then updated.
Temporarily stores print jobs on the scanner hard disk before printing
Notes:
•
Off is the factory default setting.
•
On buffers jobs on the scanner hard disk.
• Auto buffers print jobs only if the scanner is busy processing data from another
input port.
•
Changing this setting from the scanner control panel and then exiting the
menus causes the scanner to restart. The menu selection is then updated.
Sets the scanner to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Sets the network address information for an external print server
Note: This menu appears only if the scanner is attached to an external print server
through the USB port.
Sets the netmask information for an external print server
Note: This menu appears only if the scanner is attached to an external print server
through the USB port.
Sets the gateway information for an external print server
Note: This menu appears only if the scanner is attached to an external print server
through the USB port.
166