Lexmark 6500e User Manual page 50

Additional printer setup
3
Turn on the printer and the scanner.
Note: Make sure the scanner, the printer, and the computer are fully on and ready.
Warning—Potential Damage: Do not connect the USB cable until instructed to do so on the computer screen.
4
Obtain a copy of the software installer package.
•
From the Software and Documentation CD that came with your scanner.
• From our Web site:
Go to http://support.lexmark.com, and then navigate to:
SUPPORT & DOWNLOAD > select your scanner > select your operating system
5
Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using the Software and Documentation CD and the installation dialog does not appear, then do the
following:
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type: D:\setup.exe > OK
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe.
c
Press Enter or click OK.
Note: D is the letter of your CD or DVD drive.
6
Click Install, and then follow the instructions on the computer screen.
7
Select Wireless connection when asked to choose a connection type.
8
From the Wireless Configuration dialog, select Guided Setup.
Note: Choose Advanced Setup only if you want to customize your installation.
50