Lexmark 6500e User Manual page 130

Faxing
Darkness
This option adjusts how light or dark your faxes will turn out in relation to the original document.
Color
This option enables or disables color in faxing.
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding settings.
•
Sides (Duplex)—Use to specify if the original document is simplex (printed on one page) or duplex (printed on both
sides). This also identifies what needs to be scanned for inclusion in the fax.
•
Orientation—Use to specify the orientation of the original document, and then changes Sides and Binding to match
the orientation.
•
Binding—Use to specify if the original document is bound on the long‑edge or short‑edge side.
Scan Preview
This option displays the first page of the image before it is included in the fax. When the first page is scanned, the
scanning is paused and a preview image appears.
Advanced Options
Touching this button lets you change Delayed Send, Advanced Imaging, Custom Job, Transmission Log, Edge Erase and
ADF Skew Fix settings.
•
Delayed Send—This lets you send a fax at a later time or date. After setting up your fax, touch Delayed Send, enter
the time and date you would like to send your fax, and then touch Done. This setting can be especially useful in
sending information to fax lines that are not readily available during certain hours, or when transmission times are
cheaper.
Note: If the printer is turned off when the delayed fax is scheduled to be sent, the fax is sent the next time the
printer is turned on.
•
Advanced Imaging—This lets you adjust the Background Removal, Contrast, Color Balance, Negative Image, Mirror
Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you fax the document.
•
Custom Job (Job Build)—This lets you combine multiple scanning jobs into a single job.
•
Transmission Log—This lets you print the transmission log or transmission error log.
•
Edge Erase—This lets you eliminate smudges or information around the edges of a document. You can choose to
eliminate an equal area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever
is within the area selected, leaving nothing on that portion of the scan.
•
ADF Skew Fix—This lets you correct slight skew in the scanned image.
130