Lexmark 6500e User Manual page 168

Printer
Hide thumbs Also See for 6500e:
Table of Contents

Advertisement

Understanding printer menus
Menu item
Job Buffering
Off
On
Auto
Advanced Status
On
Off
Protocol
Fastbytes
Standard
Honor Init
Off
On
Parallel Mode 2
On
Off
Mac Binary PS
Auto
On
Off
ENA Address
yyy.yyy.yyy.yyy
ENA Netmask
yyy.yyy.yyy.yyy
Description
Temporarily stores print jobs on the scanner hard disk before printing
Notes:
Off is the factory default setting.
On buffers print jobs on the scanner hard disk.
Auto buffers print jobs only if the scanner is busy processing data from
another input port.
Changing this setting from the scanner control panel and then exiting the
menus causes the scanner to restart. The menu selection is then updated.
Enables bidirectional communication through the parallel port
Notes:
On is the factory default setting.
Off disables parallel port negotiation.
Specifies the parallel port protocol
Notes:
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
Standard tries to resolve parallel port communication problems.
Determines if the scanner honors hardware initialization requests from the computer
Notes:
Off is the factory default setting.
The computer requests initialization by activating the Init signal from the
parallel port. Many personal computers activate the Init signal each time the
computer is turned on.
Determines if the parallel port data is sampled on the leading or trailing edge of a
strobe
Note: On is the factory default setting.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
Off filters print jobs using the standard protocol.
On processes raw binary PostScript print jobs.
Sets the network address information for an external print server
Note: This menu is available only if the scanner is attached to an external print
server through the USB port.
Sets the netmask information for an external print server
Note: This menu appears only when the scanner is attached to an external print
server through the USB port.
168

Advertisement

Table of Contents
loading

Table of Contents