Lexmark 6500e User Manual page 185

Understanding printer menus
Menu item
Timeouts
Wait Timeout
15–65535 sec
Disabled
Timeouts
Job Hold Timeout
5–255 sec
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
Auto
On
Off
Print Recovery
Page Protect
Off
On
Press Sleep Button
Sleep
Do nothing
Press and Hold Sleep Button
Do nothing
Sleep
Description
Sets the amount of time in seconds the scanner waits for additional
data before canceling a print job
Notes:
•
"40 sec" is the factory default setting.
• Wait Timeout is available only when the scanner is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Sets the amount of time the scanner waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue
Notes:
•
"30 sec" is the factory default setting.
•
This menu appears only when a scanner hard disk is
installed.
Lets the printer automatically continue printing from certain offline
situations when not resolved within the specified time period
Note: Disabled is the factory default setting.
Specifies whether the printer reprints jammed pages
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Lets the printer successfully print a page that may not have printed
otherwise
Notes:
•
Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Determines how the scanner, while in idle state, reacts to a short
press of the Sleep button
Note: Sleep is the factory default setting.
Determines how the scanner, while in Idle state, reacts to a long
press of the Sleep button
Note: Do nothing is the factory default setting.
185