Additional Printer Setup; Installing A Scanner Communications Card In The Printer - Lexmark 6500e User Manual

Additional printer setup

Additional printer setup
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.

Installing a scanner communications card in the printer

Notes:
•
The scanner communications card should be installed only on its designated slot. If an internal memory is
installed in this slot, then transfer it to the option slot beside it.
•
This task requires a screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1
Open the system board door.
23