Lexmark 6500e User Manual page 191

Understanding printer menus
General Fax Settings
Menu item
Station Name
or
Fax Name
Station Number
or
Fax Number
Station ID
Station Name/Fax Name
Station Number/Fax Number
Enable Manual Fax
Off
On
Memory Use
Equal
Mostly send
All send
All receive
Mostly receive
Cancel Faxes
Allow
Don't Allow
Caller ID
On
Off
Alternate
Note: This menu appears only when
the selected country supports
multiple patterns
Fax number masking
Off
From left
From right
Digits to mask
0–58
Description
Specifies the name of the fax in the printer
Specifies a number associated with the fax
Specifies how the fax is identified
Sets the printer to fax only manually. This requires a line splitter and a telephone
handset.
Notes:
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
• Press # 0 on the numeric keypad to go directly to the Manual Fax function.
Defines the allocation of non-volatile memory between sending and receiving fax jobs
Notes:
•
Equal is the factory default setting. Equal splits the memory for sending and
receiving fax jobs into equal amounts.
•
"Mostly send" specifies that most of the memory is set to send fax jobs.
•
"All send" specifies that all the memory is set to send fax jobs.
• "All receive" specifies that all the memory is set to receive fax jobs.
•
"Mostly receive" specifies that most of the memory is set to receive fax jobs.
Specifies whether the printer cancels fax jobs
Activates caller ID
Notes:
• Called ID is set to On if the country selected during the initial setup sequence
has a default Caller ID Pattern.
•
Alternate appears when the selected country has an alternate Caller ID Pattern
value.
Specifies the direction from where digits are masked in an outgoing fax number
Note: The number of characters masked is determined by the "Digits to mask"
setting.
Specifies the number of digits to mask in an outgoing fax number
Note: 0 is the factory default setting.
191